2002 Buick Regal Turn Signal Bulbs

You need to connect the electrical connector, install the headlamp bulb/socket to the headlamp, rotate the headlamp bulb/socket clockwise, install the rubber access covers, connect the electrical connector to the headlamp, position the headlamp mounting tabs, apply light pressure to the headlamp lens, align the headlamp retainers over the headlamp mounting tabs, press the retainers down, inspect the headlamp, check the headlamp aim, and close the hood.

You need to install the tail lamp bulbs to the sockets, the tail lamp sockets to the tail lamp housing, position the tail lamp assembly, apply light pressure to the lens, install the tail lamp assembly plastic wingnut retainers, the corner of the rear compartment trim panel into position, the remaining tail lamp plastic wingnut retainer, the rear compartment convenience net, and close the rear compartment.

You need to open the rear compartment, remove the rear compartment convenience net and the visible plastic wingnut, pull back the corner of the rear compartment trim panel, apply light pressure to the tail lamp lens, remove the remaining plastic wingnuts, the tail lamp assembly, rotate the lamp sockets counterclockwise, remove the tail lamp housing assembly and the tail lamp bulbs.

You need to open the hood, apply light pressure to the headlamp lens to hold the headlamp in place, lift the headlamp retainers to release, remove the retainers, remove the headlamp mounting tabs, disconnect the electrical connector, remove the headlamp and the rubber access covers, rotate the headlamp bulb/socket counterclockwise, remove the headlamp bulb/socket, and disconnect the electrical connector.