2002 Buick Rendezvous Air Filter

You should not use solvent of any type when cleaning the gasket surfaces on the intake manifold and the Throttle Body assembly, as damage to the gasket surfaces and throttle body assembly may result, and use care in cleaning the gasket surfaces on the intake manifold and the throttle body assembly, as sharp tools may damage the gasket surfaces.

The installation procedure is to position the MAP Sensor to the bracket, connect the MAP inlet vacuum hose, then connect the MAP sensor electrical connector, and install the screws.

You will need to tighten the vertical lower Intake Manifold bolts (the four middle ones) to 7 Nm (62 lb in), tighten the diagonal lower intake manifold bolts (two on each end) to 7 Nm (62 lb in), tighten the vertical lower intake manifold bolts (the four middle ones) to 13 Nm (115 lb in), and tighten the diagonal lower intake manifold bolts (two on each end) to 25 Nm (18 lb-ft).