< Back ×
My Vehicle Change Vehicle
2002 Buick Rendezvous
< Back to View All
Transmissions Components & Shifters
- Department
- Prices
OEM (Genuine) 2002 Buick Rendezvous Lever Asm, Shift
PartNumber: 88952013
Product Specifications- Other Names: Gear Shift Assembly, Shift Lever
- Item Dimensions: 8.4 x 4.3 x 4.5 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2002 Buick Rendezvous Lever Asm, Shift
Vehicle Fitment- 2002 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
FAQ for Automatic Transmission Shift Levers Repair
Q: What should be done before pressing the adjuster lock button down flush with the adjuster body?
A:
You will need to carefully push down the pin until the pin snaps to attach the pin to the automatic transaxle range selector lever.
By Bob
GM Specialist
01/11/2022Q: How to place the inside car gear shifter in the neutral position?
A:
You will need to rotate the shift lever to the low 1 position, fully down, push forward on the lever while slowly pushing up, and release the gear shift lever once the gear shift lever stops solidly.
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the automatic transaxle range selector lever retaining nut?
A:
The recommended torque is 20 Nm (15 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the shift control nuts?
A:
The recommended torque is 10 Nm (89-inch lbs.).
By Bob
GM Specialist
01/11/2022Q: What's the proper way to remove the automatic transaxle range selector lever cable?
A:
The proper way is to remove the throttle body air inlet duct, remove the automatic transaxle range selector lever cable from the automatic transaxle range selector lever, remove the automatic transaxle range selector lever retaining nut, then remove the automatic transaxle range selector lever from the automatic transaxle.
By Bob
GM Specialist
01/11/2022Q: How to remove the floor shift control?
A:
You will need to remove the console trim plate, remove the shift cable end from the shift control lever, remove the shift control cable from the shift control, remove the shift control wire harness from the shift control, and remove the shift control fasteners and the shift control.
By Bob
GM Specialist
01/11/2022See more FAQs (1)