< Back ×
My Vehicle Change Vehicle
2002 Buick Rendezvous
< Back to View All
Wipers & Washers
- Department
- Prices
OEM (Genuine) 2002 Buick Rendezvous Wiper Arm
PartNumber: 10317150
Product Specifications- Notes: Aztek, Rendezvous; Left
- Location: Driver Side
- Other Names: Front Arm, Wiper Arm
- Item Dimensions: 32.6 x 5.6 x 3.4 inches
- Item Weight: 1.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 88891178, 12494797
- Part Description: 2002 Buick Rendezvous Wiper Arm
Vehicle Fitment- 2002 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
OEM (Genuine) 2002 Buick Rendezvous Arm Asm-Windshield Wiper
PartNumber: 10306470
Product Specifications- Notes: Aztek, Rendezvous; Right
- Location: Passenger Side
- Other Names: Front Arm, Wiper Arm
- Item Dimensions: 32.6 x 4.7 x 2.2 inches
- Item Weight: 1.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 88891177, 12494798
- Part Description: 2002 Buick Rendezvous Arm Asm-Windshield Wiper
Vehicle Fitment- 2002 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
OEM (Genuine) 2002 Buick Rendezvous Rear Arm
PartNumber: 10323561
Product Specifications- Notes: Rendezvous
- Other Names: Rear Arm, Wiper Arm
- Item Dimensions: 13.3 x 1.6 x 1.1 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22143294, 12487604, 88958132, 10446627
- Part Description: 2002 Buick Rendezvous Rear Arm
Vehicle Fitment- 2002 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
FAQ for Windshield Wiper Arms Repair
Q: What should be done before disconnecting the washer hose from the washer nozzle?
A:
You will need to turn the ignition switch to the ACCY position, turn the wiper switch to the DELAY position and turn the ignition OFF when the wiper arms are in the inner wire position and not moving.
By Bob
GM Specialist
01/11/2022Q: How to remove the rear wiper arm?
A:
You will need to mark the position of the wiper blade on the rear window, remove the cap from the rear wiper arm, remove the rear wiper arm nut and the rear wiper arm with J 39822, and remove the rear wiper blade from the rear wiper arm.
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the rear wiper arm nut?
A:
The recommended torque is 25 N.m (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the wiper arm nut installed onto the wiper transmission driveshaft?
A:
The recommended torque is 48 N.m (35 lb-ft).
By Bob
GM Specialist
01/11/2022