Notes: 4.8, 5.3 & 6.0 L Gas, With High Capacity; Part included with air cleaner assembly.; 8.1 L Gas, With High Capacity; Part included with air cleaner assembly.; 4.8, 5.3 & 6.0 L Gas, With High Capacity; All Models; Without Diesel; With High Capacity Cleaner; 8.1 L Gas, With High Capacity
Notes: 4.8, 5.3 & 6.0 L Gas, Without High Capacity; Part included with air cleaner assembly.; 8.1 L Gas, Without High Capacity; Part included with air cleaner assembly.; 4.8, 5.3 & 6.0 L Gas, Without High Capacity; All Models; Without Diesel; Without High Capacity Cleaner; 8.1 L Gas, Without High Capacity
Other Names: Air Filter, Element
Item Dimensions: 12.8 x 10.4 x 2.6 inches
Item Weight: 1.60 Pounds
Replaced by: 22845992
Part Description: 2003 GMC Sierra 3500 Element, Air Cleaner
More Info
Vehicle Fitment
2003 GMC Sierra 3500 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
Part Description: 2003 GMC Sierra 3500 Cleaner Asm, Air
More Info
Vehicle Fitment
2003 GMC Sierra 3500 | Base, SL, SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
FAQ for Air Filter Repair
Q: What is the air filter element removal procedure?
A:
Remove the air cleaner outlet duct. Next, disconnect the mass air flow/intake air temperature (MAF/IAT) sensor electrical connector and loosen the air cleaner housing top screws. Then remove the air cleaner housing cover and the air filter element.
By Bob
GM Specialist
01/11/2022
Q: What is the air filter element installation procedure?
A:
Install the air cleaner housing cover and tighten the air cleaner housing top screws until snug. Next, connect the MAF/IAT sensor electrical connector. then install the air cleaner outlet duct.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the service and removal procedure for the throttle body?
A:
The procedure is to remove the air cleaner intake duct, inspect the Throttle Body bore and the throttle plate for deposits, and clean the throttle body bore and the throttle plate, and the air cleaner intake duct.
Q: What should I pay attention to about the intake air plenum gasket?
A:
Do not replace the upper Intake Manifold Gaskets with the original orange gasket material, P/N 17113557.
Q: What is the installation procedure for the manifold pressure/vacuum sensor?
A:
You can install the MAP Sensor, connect the MAP sensor electrical connector, and install the engine sight shield.