< Back ×
My Vehicle Change Vehicle
2003 GMC Sierra 3500
< Back to View All
Control Arms & Suspension Rods
- Department
- Brands
- Prices
OEM (Genuine) 2003 GMC Sierra 3500 Damper
PartNumber: 15059138
Product Specifications- Notes: 2 Wheel Drive, 3/4, 1 Ton; 4 Wheel Drive
- Other Names: Damper, Steering Damper
- Item Dimensions: 24.9 x 5.2 x 5.2 inches
- Item Weight: 3.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15155638
- Part Description: 2003 GMC Sierra 3500 Damper
Vehicle Fitment- 2003 GMC Sierra 3500 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
$84.01 MSRP:$158.51You Save: $74.50 (48%)
Monroe® Magnum™ Front Steering Stabilizer for 2003 GMC Sierra 3500
PartNumber: SC2963Product Specifications- Notes: with Original Equipment Steering Damper
- Body Diameter: 1.860"
- Compressed Length: 12.50"
- Dust Shield: Without
- Extended Bumper Stop: Without
- Extended Hydraulic Lockout: Without
- Extended Length: 20.625"
- Lower Mounting: Loop Bushing Sleeve Mount - 0.5" Sleeve ID x 1.25" Sleeve OAL
- Travel Length: 8.125"
- UPC: 048598015518
- Upper Mounting: Loop Bushing Mount - 0.625" Bushing ID x 1.313" Bushing OAL
- Part Description: 2003 GMC Sierra 3500 Magnum™ Front Steering Stabilizer
Vehicle Fitment- 2003 GMC Sierra 3500 | All Trims | All Engines
$33.69
Bilstein® 46Mm Smooth Body Monotube Front Steering Stabilizer for 2003 GMC Sierra 3500
PartNumber: 33-174525Product Specifications- Black Boot: With
- Color: Zinc Plated
- Compressed Length: 12.83"
- Design: 46mm Smooth Body Monotube
- Extended Length: 20.08"
- Lower Mount: Cantilever
- Reservoir: Without
- UPC: 651860657172
- Upper Mount: Eye 0.5"
- Part Description: 2003 GMC Sierra 3500 46Mm Smooth Body Monotube Front Steering Stabilizer
Vehicle Fitment- 2003 GMC Sierra 3500 | SLE | All Engines
- 2003 GMC Sierra 3500 | SLT | All Engines
- 2003 GMC Sierra 3500 | Base | All Engines
$105.80
FAQ for Steering Damper Repair
Q: How to install the steering damper?
A:
You can install the steering damper, the mounting bolt, the steering damper ball stud, and the J 29193, seat the ball stud in the relay rod, remove the J 29193, install the prevailing torque nuts, and the engine protection shield.
By Bob
GM Specialist
02/11/2022Q: What is the recommended bolt torque for the steering damper?
A:
The recommended bolt torque is 40 N.m (30 lb-ft).
By Bob
GM Specialist
02/11/2022Q: How to remove the steering damper?
A:
You can raise the vehicle, remove the engine protection shield, the steering damper, the steering damper ball stud from the relay rod, the steering damper mounting bolt, and the steering damper.
By Bob
GM Specialist
02/11/2022