< Back ×
My Vehicle Change Vehicle
2004 Buick Rendezvous
< Back to View All
Wheels & Related Parts
- Department
- Bolt Pattern
- Color
- Diameter
- Finish
- Width
- Brands
- Prices
OEM (Genuine) 2004 Buick Rendezvous Wheel, Steel
PartNumber: 9595642
Product Specifications- Other Names: Wheel Steel
- Item Dimensions: 17.2 x 17.5 x 8.1 inches
- Item Weight: 25.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Buick Rendezvous Wheel, Steel
Vehicle Fitment- 2004 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
$74.92 MSRP:$117.84You Save: $42.92 (37%)
Dorman® Black 16X6 5 Steel Wheel for 2004 Buick Rendezvous
PartNumber: 939-184Product Specifications- Notes: 16" Steel Whls
- Bolt Pattern Diameter: 115 mm
- Bore Diameter: 71.6 mm
- Center Cap Included: No
- Color: Black
- Dimensions: 16 x 6.5
- Grade Type: Standard
- Inside Diameter: 365 mm
- Load Rating (lbs): 1235 Lbs.
- Lug Hole Diameter: 14.5 mm
- Lug Hole Quantity: 5
- Lug Stud/Bolt Count: 5
- OE Part Number: 9593083, 9595642
- Offset (mm): 51 mm
- Package Contents: 1 Steel Wheel
- Primary Bolt Pattern: 5 x 115
- Split Type: Not Applicable
- UPC: 019495537410
- Valve Stem Diameter: 11.5
- Wheel Diameter (in): 17.36 In.
- Wheel Finish: Painted
- Wheel Material: Steel
- Width (in): 7.64 In.
- Part Description: 2004 Buick Rendezvous Black 16X6 5 Steel Wheel
Vehicle Fitment- 2004 Buick Rendezvous | All Trims | All Engines
$70.18
OEM (Genuine) 2004 Buick Rendezvous Wheel, Spare
PartNumber: 9593686
Product Specifications- Notes: All
- Other Names: Compact Spare, Spare Wheel, Wheel Spare
- Item Dimensions: 26.1 x 17.5 x 6.8 inches
- Item Weight: 21.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Buick Rendezvous Wheel, Spare
Vehicle Fitment- 2004 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
$118.62 MSRP:$178.97You Save: $60.35 (34%)
OEM (Genuine) 2004 Buick Rendezvous Wheel, Alloy
PartNumber: 12490098
Product Specifications- Notes: 16", Aluminum-Nw0
- Other Names: Wheel Alloy
- Item Dimensions: 21.4 x 21.7 x 16.9 inches
- Item Weight: 19.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Buick Rendezvous Wheel, Alloy
Vehicle Fitment- 2004 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
$155.45 MSRP:$232.95You Save: $77.50 (34%)
OEM (Genuine) 2004 Buick Rendezvous Wheel Rim-17X6.5 Aluminum 52Mm Offset 115.0 Bellcrank *Machine Face
PartNumber: 9595009
Product Specifications- Notes: 17", Aluminum-Pfh
- Other Names: Wheel Alloy
- Item Dimensions: 21.0 x 21.4 x 11.4 inches
- Item Weight: 26.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 88957157
- Part Description: 2004 Buick Rendezvous Wheel Rim-17X6.5 Aluminum 52Mm Offset 115.0 Bellcrank *Machine Face
Vehicle Fitment- 2004 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
OEM (Genuine) 2004 Buick Rendezvous Wheel Rim Kit, Aluminum *Chrome
PartNumber: 12490109
Product Specifications- Notes: 16", Chrome-Py1
- Other Names: Wheel Alloy
- Item Dimensions: 21.4 x 21.7 x 16.6 inches
- Item Weight: 20.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Buick Rendezvous Wheel Rim Kit, Aluminum *Chrome
Vehicle Fitment- 2004 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
FAQ for Alloy Wheels Repair
Q: How to replace the tire?
A:
You need to deflate the tire completely first, next use the tire changer to remove the tire from the wheel, and remove any rubber, light rust, or corrosion from the wheel bead seats, then apply GM P/N 12345884 (Canadian P/N 5728223) or equivalent to the tire bead and the wheel rim, then install the tire to the wheel, inflate the tire to the proper air pressure, and ensure that the locating rings are visible on both sides of the tire to verify that the tire bead is fully seated on the wheel.
By Bob
GM Specialist
01/11/2022Q: How to remove the Tire and Wheel?
A:
You need to raise and support the vehicle, remove the wheel cover, the wheel hub cap, or the wheel nut caps as necessary, and remove the wheel nuts, mark the relationship of the wheel to the hub, then remove the tire and wheel, clean the wheel mounting surface and brake rotor/brake drum mounting surface to remove any corrosion or foreign material accumulation.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the wheel nut caps?
A:
The recommended torque is 3 Nm (27-inch lbs.).
By Bob
GM Specialist
01/11/2022Q: What should be noticed when serving the Compact Spare Tire?
A:
First, the compact spare wheel should not be used with standard tires, snow tires, wheel covers, or trim rings. If such use is attempted, damage to these items or other parts of the vehicle may occur. The compact spare should be used only on vehicles that offer it as original equipment. Then, you should not take the vehicle through an automatic car wash with the compact spare installed. The vehicle may get caught, which could result in property damage.
By Bob
GM Specialist
01/11/2022Q: What kind of special tools will be required when serving the Tire and Wheel?
A:
The tools required include J39544-KIT Complete Torque Socket Set.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the wheel nuts?
A:
The recommended torque is 140 Nm (100 ft. lbs.).
By Bob
GM Specialist
28/10/2022Q: How to repair the Aluminum Wheel Porosity?
A:
First, you need to remove the tire and wheel, next inflate the tire to the manufactures specified pressure as stated on the tire, and submerge the tire/wheel into a water bath in order to locate the leak, inscribe a mark on the wheel in order to indicate the leak areas, and inscribe a mark on the tire at the valve stem in order to Indicate the orientation of the tire to the wheel, then remove the tire from the wheel, scuff the inside of the rim surface at the leak area, and clean the leak area, and apply 3 mm (0.12 inch) thick layer of adhesive/sealant, GM P/N 12378478 (Canadian P/N 88900041) or equivalent, to the leak area, then allow for the adhesive/sealant to dry, align the inscribed mark on the tire with the valve stem on the wheel, and install the tire to the wheel, then inflate the tire to the manufactures specified pressure as stated on the tire, then submerge the tire/wheel into a water bath in order ensure the leak is sealed, balance the tire and wheel, and install the tire and wheel, ultimately lower the vehicle.
By Bob
GM Specialist
28/10/2022Q: How to refinish the Aluminum Wheel?
A:
You need to remove the tire and wheel assembly from the vehicle, remove the balance weights from the wheel, then remove the tire from the wheel, remove the lubricants, wax, and dirt from the wheel, remove the paint from the wheel, spin the wheel and restore the circular machined appearance if the wheel had a machined aluminum finish, then mask the wheel mounting surface and the wheel nut contact surface, follow the paint manufacturer's instructions, unmask the wheel, install a new valve stem and the tire to the wheel, remove the corrosion, overspray, and dirt from the wheel mounting surface, then install the tire and wheel assembly to the vehicle.
By Bob
GM Specialist
28/10/2022Q: What kind of special tools will be required when serving the Tire and Wheel?
A:
The tools required include J39544-KIT Complete Torque Socket Set.
By Bob
GM Specialist
28/10/2022See more FAQs (4)