< Back ×
2004 Buick Rendezvous Back Up Light Bulbs
My Vehicle Change Vehicle
2004 Buick Rendezvous
< Back to View All
Car Bulbs
- Department
- Prices
OEM (Genuine) 2004 Buick Rendezvous Run Lamp Bulb
PartNumber: 13503401$4.66 MSRP:$8.78You Save: $4.12 (47%)Product Specifications- Location: Driver Side; Passenger Side
- Item Dimensions: 4.2 x 3.1 x 2.3 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25088519, 09427587, 09442445, 9417561, 09421330, 09441595, 09417561, 9442445, 25088518, 9441595, 9421330, 96057076, 9441873, 9427587, 09441873
- Replaced by: 13503359
- Part Description: 2004 Buick Rendezvous Run Lamp Bulb
Vehicle Fitment- 2004 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
OEM (Genuine) 2004 Buick Rendezvous Run Lamp Bulb
PartNumber: 9425542$3.42 MSRP:$6.18You Save: $2.76 (45%)Product Specifications- Location: Driver Side; Passenger Side
- Item Dimensions: 4.5 x 3.1 x 2.5 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Buick Rendezvous Run Lamp Bulb
Vehicle Fitment- 2004 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
OEM (Genuine) 2004 Buick Rendezvous Stoplamp Bulb
PartNumber: 12450108$4.22 MSRP:$7.94You Save: $3.72 (47%)Product Specifications- Location: Driver Side; Passenger Side
- Item Dimensions: 4.1 x 3.0 x 2.3 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12450004
- Part Description: 2004 Buick Rendezvous Stoplamp Bulb
Vehicle Fitment- 2004 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
FAQ for Back Up Light Bulbs Repair
Q: How do you remove the tail lamp assembly and/or backup, side marker, stop, and turn signal bulb?
A:
You can open the liftgate, remove the screws from the tail amp, slide the tail lamp rearward to disengage it from the retainers on the rear body panel, disconnect the electrical connector from the tail lamp wiring harness, remove the tail lamp and side marker lamp sockets from the tail lamp, depressing the locking tab and turning counterclockwise and remove the bulbs from the tail lamp and the side marker lamp sockets.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the tail lamp screws?
A:
The recommended torque is 2 Nm (18 lb in).
By Bob
GM Specialist
28/10/2022