2004 Buick Rendezvous Brake Hose

You need to install the park brake cable, install the park brake cable to the Parking Brake Cable bracket, then install the park brake cable to the park brake actuator, install the rear park brake cable retaining nut and bolt, and install the parking brake left side cable to the park brake equalizer, then secure the park brake cable to the rear cross member with 2 rivets, and adjust the park brake cable, lastly lower the vehicle.

You should notice that the steering column must be in the lock position before disconnecting the steering column, the Steering Shaft coupling, the intermediate shaft, and the lower steering shaft.

You need to raise and support the vehicle, next use a utility stand to support the control arm forward of the coil spring, remove the control arm bolts from the rear axle, then use the utility stand to lower the rear axle enough to gain access to the Control Arm Bushing, mark the orientation of the control arm bushing in the lower control arm, finally remove the control arm bushing.