< Back ×
2004 Buick Rendezvous Cigarette Lighters
My Vehicle Change Vehicle
2004 Buick Rendezvous
< Back to View All
Cigarette Lighters
- Department
- Prices
OEM (Genuine) 2004 Buick Rendezvous Accessory Power Receptacle
PartNumber: 25774623$7.44 MSRP:$11.68You Save: $4.24 (37%)Product Specifications- Notes: Driver Side, W/O Enhanced Speaker System; Driver Side, W/Enhanced Speaker System
- Location: Driver Side
- Item Dimensions: 2.8 x 1.5 x 1.1 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 1999477, 12450044, 01999477
- Part Description: 2004 Buick Rendezvous Accessory Power Receptacle
Vehicle Fitment- 2004 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
OEM (Genuine) 2004 Buick Rendezvous Receptacle Asm, Cigarette Lighter
PartNumber: 25776667$11.34 MSRP:$16.87You Save: $5.53 (33%)Product Specifications- Item Dimensions: 2.8 x 1.6 x 1.2 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12450043
- Part Description: 2004 Buick Rendezvous Receptacle Asm, Cigarette Lighter
Vehicle Fitment- 2004 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
Product Specifications- Other Names: Lighter
- Item Dimensions: 2.3 x 1.4 x 1.0 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 1999433, 25617713, 10098576, 25600663, 01999433, 10060404, 11516146, 11516140
- Part Description: 2004 Buick Rendezvous Lighter
Vehicle Fitment- 2004 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
FAQ for Cigarette Lighters Repair
Q: What should you do after installing the cigar lighter fuse?
A:
You should inspect the cigar lighter for proper operation.
By Bob
GM Specialist
29/10/2022Q: How to measure the voltage at a selected point in a circuit?
A:
You need to disconnect the electrical harness connector for the circuit being tested, enable the circuit and/or system being tested, then select the V (AC) or V (DC) position on the DMM, connect the positive lead of the DMM to the point of the circuit to be tested, connect the negative lead of the DMM to a good ground, and the DMM displays the voltage measured at that point.
By Bob
GM Specialist
29/10/2022Q: What is the installation procedure for the accessory power receptacle?
A:
You should position the 12-volt power supply retainer with the key to the slot into the power supply hole, install the power supply retainer pressing into place until fully seated, connect the electrical connector to the i/p power supply receptacle, position the power supply receptacle to the retainer, install the power supply receptacle into the i/p, pressing into place until fully seated, install the power supply fuse and inspect the power supply for proper operation.
By Bob
GM Specialist
29/10/2022Q: What special tool will I need when servicing the cigar lighter housing?
A:
You will need a cigar lighter housing remover.
By Bob
GM Specialist
29/10/2022Q: What kind of special tool will I need when servicing the accessory power receptacle?
A:
You will need a cigar lighter socket remover.
By Bob
GM Specialist
29/10/2022