< Back ×
My Vehicle Change Vehicle
2004 Buick Rendezvous
< Back to View All
Cooling Systems, Fans & Radiators
- Department
- Prices
OEM (Genuine) 2004 Buick Rendezvous Hose
PartNumber: 24504912
Product Specifications- Notes: 3.4 & 3.5 Liter, Throttle Body Inlet
- Other Names: Hose
- Item Dimensions: 4.2 x 2.0 x 1.1 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Buick Rendezvous Hose
Vehicle Fitment- 2004 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS
$9.46 MSRP:$17.09You Save: $7.63 (45%)
OEM (Genuine) 2004 Buick Rendezvous Hose
PartNumber: 24504913
Product Specifications- Notes: 3.4 & 3.5 Liter, Throttle Body Outlet
- Other Names: Hose
- Item Dimensions: 3.0 x 1.3 x 0.8 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Buick Rendezvous Hose
Vehicle Fitment- 2004 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS
$14.26 MSRP:$26.90You Save: $12.64 (47%)
OEM (Genuine) 2004 Buick Rendezvous Upper Hose
PartNumber: 89023429
Product Specifications- Notes: Aztek, Rendezvous; 3.4L; 3.4 & 3.5 Liter
- Other Names: Lower Hose
- Item Dimensions: 13.0 x 6.5 x 6.4 inches
- Item Weight: 1.50 Pounds
- Replaced by: 19302690
- Part Description: 2004 Buick Rendezvous Upper Hose
Vehicle Fitment- 2004 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS
$30.07 MSRP:$45.37You Save: $15.30 (34%)
OEM (Genuine) 2004 Buick Rendezvous Outlet Radiator Coolant Hose Assembly
PartNumber: 10316621
Product Specifications- Notes: Aztek, Rendezvous; 3.6L; 3.6 Liter
- Other Names: Lower Hose
- Item Dimensions: 16.8 x 9.6 x 6.1 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Buick Rendezvous Outlet Radiator Coolant Hose Assembly
Vehicle Fitment- 2004 Buick Rendezvous | CX, CXL, CXL Plus, Ultra | 6 Cyl 3.6 L GAS
OEM (Genuine) 2004 Buick Rendezvous Upper Radiator Hose Assembly
PartNumber: 10392892
Product Specifications- Notes: Aztek, Rendezvous; 3.6L; 3.6 Liter
- Other Names: Upper Hose
- Item Dimensions: 16.9 x 11.1 x 10.9 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10331167
- Part Description: 2004 Buick Rendezvous Upper Radiator Hose Assembly
Vehicle Fitment- 2004 Buick Rendezvous | CX, CXL, CXL Plus, Ultra | 6 Cyl 3.6 L GAS
OEM (Genuine) 2004 Buick Rendezvous Radiator Outlet Hose (Lower)
PartNumber: 89023430
Product Specifications- Notes: Aztek, Rendezvous; 3.4L; 3.4 & 3.5 Liter
- Other Names: Lower Hose
- Item Dimensions: 16.7 x 6.4 x 3.3 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 88894252, 10352408
- Part Description: 2004 Buick Rendezvous Radiator Outlet Hose (Lower)
Vehicle Fitment- 2004 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS
FAQ for Coolant Hose Repair
Q: What kind of special tools will be required when serving the throttle body heater hose-inlet?
A:
The tools required include J 38185 Hose Clamp Pliers.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the water outlet lower bolt?
A:
The recommended torque is 50 Nm (37 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: How to remove the throttle body heater hose-inlet?
A:
You need to remove the air cleaner duct, remove the throttle cable bracket to gain access to the throttle body heater hose clamp, drain the coolant until the coolant level is below the throttle body heater hoses, next remove the hose clamp, and finally remove the throttle body heater inlet hose.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the coolant inlet pipe?
A:
You should install the new coolant inlet pipe seal, install the coolant inlet pipe bolts, then install the lower radiator hose to the coolant inlet pipe, and fill the cooling system.
By Bob
GM Specialist
01/11/2022Q: How to remove the coolant inlet pipe?
A:
You need to drain the coolant until the coolant level is below the lower radiator hose, remove the lower radiator hose from the coolant inlet pipe, remove the water coolant inlet pipe bolts and the coolant inlet pipe, and remove and discard the coolant inlet pipe seal.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the throttle body heater hose-inlet?
A:
You should install the throttle body heater inlet hose, use the J 38185 in order to install the hose clamps, install the throttle cable bracket, fill the cooling system, then install the air cleaner duct.
By Bob
GM Specialist
01/11/2022See more FAQs (1)