< Back ×
My Vehicle Change Vehicle
2004 Buick Rendezvous
< Back to View All
Power Steering Pumps
- Department
- Brands
- Prices
OEM (Genuine) 2004 Buick Rendezvous Reservoir Seal Kit
PartNumber: 26020642
Product Specifications- Notes: 3.4 & 3.5 Liter; 3.6 Liter
- Item Dimensions: 7.6 x 5.3 x 0.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26023510
- Part Description: 2004 Buick Rendezvous Reservoir Seal Kit
Vehicle Fitment- 2004 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
$9.21 MSRP:$14.63You Save: $5.42 (38%)
Dorman® OE Solutions Power Steering Reservoir for 2004 Buick Rendezvous
PartNumber: 603-905Product Specifications- Color: Black
- Material: Plastic
- Reservoir Type: Attached
- UPC: 019495122593
- Part Description: 2004 Buick Rendezvous OE Solutions Power Steering Reservoir
Vehicle Fitment- 2004 Buick Rendezvous | All Trims | 6 Cyl 3.4L
$39.22
OEM (Genuine) 2004 Buick Rendezvous Reservoir Kit, P/S Fluid
PartNumber: 26048008
Product Specifications- Notes: 3.4 & 3.5 Liter; 3.6 Liter
- Item Dimensions: 7.8 x 7.2 x 6.6 inches
- Item Weight: 1.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Buick Rendezvous Reservoir Kit, P/S Fluid
Vehicle Fitment- 2004 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
$50.75 MSRP:$106.01You Save: $55.26 (53%)
FAQ for Power Steering Reservoir Repair
Q: What is the proper way to install the Remote PS Fluid Reservoir Bracket (LY7)?
A:
You should install the power steering reservoir bracket to the power steering reservoir, and install the power steering reservoir bracket bolts, install the power steering reservoir to the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to assemble the Power Steering Reservoir-Off Vehicle (CB Series)?
A:
You should lubricate the new O-ring seal with power steering fluid, install the new O-ring seal onto the neck of the reservoir, install the reservoir onto the hydraulic pump assembly, align the feet of the reservoir with the sides of the hydraulic pump housing, then install the new reservoir retaining clips.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the power steering reservoir bracket bolts?
A:
The recommended torque is 6 Nm (5 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: How to remove the Remote PS Fluid Reservoir Bracket (LY7)?
A:
You need to remove the power steering reservoir from the vehicle, remove the power steering reservoir bracket bolts from the vehicle, then remove the power steering reservoir bracket from the power steering reservoir.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the right front frame-to-body bolt?
A:
The recommended torque is 155 Nm (114 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the right rear frame-to-body bolt?
A:
The recommended torque is 240 Nm (177 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the power steering reservoir mounting stud bolt?
A:
The recommended torque is 25 Nm (19 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: How to disassemble the Power Steering Reservoir-Off Vehicle (CB Series)?
A:
You need to place the hydraulic pump on a fixed, flat surface, with the shaft facing upward, insert a screwdriver into the retaining clip tab, next use the screwdriver, force the retaining clip tab outward, and slide the reservoir clip away from the hydraulic pump assembly, and repeat the above steps to remove the second reservoir clip, then remove the reservoir from the hydraulic pump housing, remove and discard the O-ring seal from the neck of the reservoir or inside the hydraulic pump housing.
By Bob
GM Specialist
01/11/2022See more FAQs (3)