< Back ×
My Vehicle Change Vehicle
2004 Buick Rendezvous
< Back to View All
Steering Racks & Gearboxes
- Department
- Brands
- Prices
Dorman® OE Solutions Rack And Pinion Seal Kit for 2004 Buick Rendezvous
PartNumber: 905-515Product Specifications- Material: Metal
- OE Part Number: 26032824
- UPC: 019495247340
- Part Description: 2004 Buick Rendezvous OE Solutions Rack And Pinion Seal Kit
Vehicle Fitment- 2004 Buick Rendezvous | All Trims | All Engines
$31.31
OEM (Genuine) 2004 Buick Rendezvous Adapter-Stub Shaft Seal(Rack & Pinion)
PartNumber: 7833732
Product Specifications- Location: Driver Side; Passenger Side
- Item Dimensions: 8.3 x 5.7 x 0.7 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Buick Rendezvous Adapter-Stub Shaft Seal(Rack & Pinion)
Vehicle Fitment- 2004 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
$13.06 MSRP:$13.65You Save: $0.59 (5%)
Gates® Rack And Pinion Seal Kit for 2004 Buick Rendezvous
PartNumber: 348362Product Specifications- UPC: 770075302148
- Part Description: 2004 Buick Rendezvous Rack And Pinion Seal Kit
Vehicle Fitment- 2004 Buick Rendezvous | All Trims | 6 Cyl 3.4L
- 2004 Buick Rendezvous | All Trims | 6 Cyl 3.6L
FAQ for Rack And Pinion Seal Repair
Q: What is the recommended torque for the extension housing bolts?
A:
The recommended torque is 32 Nm (24 ft. lbs.).
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the extension housing fill plug and gasket?
A:
The recommended torque is 28 Nm (21-inch lbs.).
By Bob
GM Specialist
02/11/2022Q: How to install the Drive Pinion Housing and/or Seal?
A:
You need to lubricate the O-ring seal with synthetic gear oil GM P/N United States 12378514 Canada P/N 88901045 or equivalent, install the oil seal to the drive pinion housing, install the O-ring seal to the drive pinion housing, install the drive pinion housing assembly and shim to the differential carrier, install the pinion housing-to-differential mounting bolts, then lubricate the sealing surfaces of the drive pinion oil seal with synthetic gear oil GM P/N United States 12378514 Canada P/N 88901045 or equivalent, install the torque tube assembly, and fill the differential with synthetic gear oil.
By Bob
GM Specialist
02/11/2022Q: What kind of special tools will be required in the replacement of the Drive Pinion Flange/Yoke and/or Oil Seal?
A:
The tools required include J 36797-A Getrag Axle Output Shaft Seal Installer and J 44755 Holding Fixture.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the flange nut?
A:
The recommended torque is 250 Nm (185 ft. lbs.).
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the pinion housing-to-differential mounting bolts?
A:
The recommended torque is 10 Nm (106-inch lbs.).
By Bob
GM Specialist
02/11/2022See more FAQs (1)