< Back ×
My Vehicle Change Vehicle
2004 Buick Rendezvous
< Back to View All
Wipers & Washers
- Department
- Brands
- Prices
Cardone Reman® Remanufactured Wiper Motor for 2004 Buick Rendezvous
PartNumber: 40-1074LProduct Specifications- Notes: Motor without Washer Pump;with Linkage
- E-Waste: Yes
- Mounting Hole Quantity: 3
- Mounting Type: Direct Bolt
- Package Contents: Wiper Motor, Instruction Manual
- Product Condition: Remanufactured
- Product Packing Weight: 16 lbs
- Terminal Type: Blade
- Washer Pump Included: No
- Part Description: 2004 Buick Rendezvous Remanufactured Wiper Motor
Vehicle Fitment- 2004 Buick Rendezvous | All Trims | All Engines
$164.85
OEM (Genuine) 2004 Buick Rendezvous Rear Motor
PartNumber: 10422078
Product Specifications- Notes: Rendezvous
- Other Names: Rear Motor, Wiper Motor
- Item Dimensions: 8.2 x 7.4 x 12.2 inches
- Item Weight: 3.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12494818
- Part Description: 2004 Buick Rendezvous Rear Motor
Vehicle Fitment- 2004 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
Cardone Reman® Remanufactured Wiper Motor for 2004 Buick Rendezvous
PartNumber: 40-1060Product Specifications- Notes: Motor without Washer Pump
- E-Waste: Yes
- Mounting Hole Quantity: 3
- Mounting Type: Direct Bolt
- Package Contents: Wiper Motor, Instruction Manual
- Product Condition: Remanufactured
- Product Packing Weight: 2.5 lbs
- Terminal Type: Blade
- Washer Pump Included: No
- Part Description: 2004 Buick Rendezvous Remanufactured Wiper Motor
Vehicle Fitment- 2004 Buick Rendezvous | All Trims | All Engines
FAQ for Windshield Wiper Motors Repair
Q: What is the recommended torque for the wiper motor cover screws?
A:
The recommended torque is 3 N.m (27 lb in).
By Bob
GM Specialist
01/11/2022Q: How to remove the Wiper Motor-Rear?
A:
You need to remove the rear wiper arm, the seal from the wiper motor driveshaft, the liftgate access trim panel, and remove the rear wiper motor screws, disconnect the rear wiper motor electrical connector, then remove the rear wiper motor from the liftgate.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the rear wiper motor screws?
A:
The recommended torque is 6 N.m (53 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the Wiper Motor Cover?
A:
You should position the wiper motor cover to the wiper motor, install the wiper motor cover screws, then install the wiper system drive module.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the wiper system drive module bolts?
A:
The recommended torque is 9 N.m (80 lb in).
By Bob
GM Specialist
01/11/2022Q: How to install the Wiper Motor Module?
A:
You need to position the wiper system drive module to the cowl, install the wiper system drive module bolts, connect the wiper motor cover electrical connector, then install the cruise control module and bracket, install the underhood electrical center, the air inlet grille panel, and the wiper arms.
By Bob
GM Specialist
01/11/2022Q: How to remove the Wiper Motor Cover?
A:
You need to remove the wiper system drive module, the wiper motor cover screws, and the wiper motor cover from the wiper motor.
By Bob
GM Specialist
01/11/2022Q: What should be noticed when servicing the wiper motor crank arm?
A:
You should notice that the wiper motor crank arm is part of the wiper system drive module assembly and is not serviced separately.
By Bob
GM Specialist
01/11/2022See more FAQs (3)