< Back ×
My Vehicle Change Vehicle
2004 Cadillac CTS
< Back to View All
Light Relays, Switches & Control Modules
- Department
- Prices
OEM (Genuine) 2004 Cadillac CTS Module
PartNumber: 10391431
Product Specifications- Notes: Body Control
- Other Names: Module
- Item Dimensions: 7.1 x 6.2 x 2.0 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25720679, 25740336
- Part Description: 2004 Cadillac CTS Module
Vehicle Fitment- 2004 Cadillac CTS | Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
OEM (Genuine) 2004 Cadillac CTS Body Control Module
PartNumber: 15276268
Product Specifications- Notes: CTS; Rear Body Control; W/Cts-V;CTS; Rear Body Control; W/O Cts-V; Labeled 25744802;CTS; Rear Body Control; W/O Cts-V; Labeled 25759960
- Other Names: Body Control Module
- Item Dimensions: 6.2 x 5.3 x 3.2 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25759960, 25744802, 25773861, 25681414, 10365206
- Part Description: 2004 Cadillac CTS Body Control Module
Vehicle Fitment- 2004 Cadillac CTS | Base, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
FAQ for Body Control Module Repair
Q: What is the proper way to install the dash integration module?
A:
The proper way is to install the screws securing the DIM top of the I/P, connect the closeout panel light electrical connector, install the I/P closeout panel, and then program the module.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the dash integration module?
A:
The procedure is to remove the I/P closeout panel, disconnect the closeout panel light electrical connector, remove the screws securing the dash integration module (DIM), and then disconnect the electrical connectors.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the rear integration module?
A:
The procedure is to remove the rear shelf, the push pins, and the RIM.
By Bob
GM Specialist
01/11/2022Q: What should be done after programming?
A:
You should turn the ignition OFF for 10 seconds, connect the scan tool to the data link connector, turn the ignition ON with the engine OFF, use the scan tool to retrieve history DTCs from all modules, and then clear all history DTCs.
By Bob
GM Specialist
01/11/2022Q: What should be noticed during the programming procedure?
A:
The Airbag Indicator light may remain ON after the DIM Module is replaced and during the programming procedure for the DIM until after the procedure is completed and the ignition key is cycled OFF and ON.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the rear integration module?
A:
The proper way is to install the RIM, reinstall the push pin fasteners and the rear shelf, and then program the module.
By Bob
GM Specialist
01/11/2022Q: What should the customer do?
A:
Customers should not order OnStar (R) modules from general motors customer care and aftersales(GMCCandA), Saturn service parts operation(SSPO), or the technical assistance center(TAC).
By Bob
GM Specialist
29/10/2022Q: What will the dealers do to correct the communications control module?
A:
Dealers/retailers are to replace the OnStar(R) module (VCIM). Dealers/retailers are to confirm vehicle eligibility before beginning repairs by using GMVIS (dealers/retailers using WINS) or the Investigate Vehicle History link (dealers/retailers using GWM). Not all vehicles within the above breakpoints may be involved.
By Bob
GM Specialist
29/10/2022Q: What is the service procedure for the communications control module?
A:
The procedure is to remove the OnStar(R) module and then install the new OnStar(R) module.
By Bob
GM Specialist
29/10/2022See more FAQs (4)