< Back ×
2004 Cadillac CTS Brake Dust Shield
My Vehicle Change Vehicle
2004 Cadillac CTS
$8.15 MSRP:$12.29You Save: $4.14 (34%)Product Specifications- Notes: Cts; Left
- Other Names: Backing Plate
- Item Dimensions: 10.3 x 10.2 x 3.5 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Cadillac CTS Backing Plate
Vehicle Fitment- 2004 Cadillac CTS | Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
- Product Specifications
- Notes: Cts; Right
- Other Names: Backing Plate
- Item Dimensions: 10.4 x 10.0 x 3.3 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Cadillac CTS Backing Plate
Vehicle Fitment- 2004 Cadillac CTS | Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
- Product Specifications
- Notes: Cts; Right
- Location: Passenger Side
- Other Names: Backing Plate, Splash Shield
- Item Dimensions: 15.4 x 12.1 x 6.8 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Cadillac CTS Shield, Front Brake
Vehicle Fitment- 2004 Cadillac CTS | Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
- Product Specifications
- Notes: Cts; Left
- Location: Driver Side
- Other Names: Backing Plate, Splash Shield
- Item Dimensions: 15.3 x 12.0 x 6.7 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Cadillac CTS Shield, Front Brake
Vehicle Fitment- 2004 Cadillac CTS | Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
FAQ for Brake Dust Shield Repair
Q: What is the removal procedure for the park brake backing plate?
A:
The procedure is to remove the rear tire and wheel assemblies, remove the rear wheel hub and bearing assembly, remove the park brake shoe hold-down spring, remove the park brake shoe assembly by grasping the shoe and spreading slightly while pulling the shoe from the actuator assembly, remove the dust cover, remove the two park brake cable bracket to knuckle mounting bolts, and then remove the backing plate from the knuckle.
By Bob
GM Specialist
02/11/2022Q: What is the proper way to install the park brake backing plate?
A:
The proper way is to install the backing plate to the knuckle, install the two park brake cable bracket to knuckle mounting bolts, install the park brake shoe assembly by grasping the shoe and spreading slightly while pulling the shoe over the actuator assembly, install the park brake shoe hold down spring, install the rear wheel hub and bearing assembly, and then install the rear tire and wheel assembly.
By Bob
GM Specialist
02/11/2022