< Back ×
My Vehicle Change Vehicle
2004 Cadillac CTS
< Back to View All
Door Handles, Locks & Related Parts
- Department
- Color/Finish
- Brands
- Prices
OEM (Genuine) 2004 Cadillac CTS Lock Switch
PartNumber: 19259955
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Lock Switch
- Item Dimensions: 5.1 x 3.1 x 1.1 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25752613
- Part Description: 2004 Cadillac CTS Lock Switch
Vehicle Fitment- 2004 Cadillac CTS | Base, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
$14.84 MSRP:$22.36You Save: $7.52 (34%)
Dorman® OE Solutions Front Driver Side Power Door Lock Switch for 2004 Cadillac CTS
PartNumber: 901-114Product Specifications- Notes: Ebony
- Attached Lead Wires: No
- Master Switch: No
- OE Part Number: 19259955, 25750265, 25752613
- Package Contents: 1 Switch
- UPC: 885484426788
- Wiring Harness Included: No
- Part Description: 2004 Cadillac CTS OE Solutions Front Driver Side Power Door Lock Switch
Vehicle Fitment- 2004 Cadillac CTS | All Trims | All Engines
ACI® Door Lock Switches for 2004 Cadillac CTS
PartNumber: 87118Product Specifications- Notes: Black
- Color: Black
- Instruction Manual Included: Not Included
- Meets / Exceeds OEM: Meets OEM Specifications
- Style: Door Lock
- Switch Button Color: Black
- UPC: 080738871189
- Part Description: 2004 Cadillac CTS Door Lock Switches
Vehicle Fitment- 2004 Cadillac CTS | All Trims | All Engines
OEM (Genuine) 2004 Cadillac CTS Switch Asm, Rear Compartment Lid Release *Ebony
PartNumber: 25750522
Product Specifications- Notes: Trunk Lid Release, Black
- Location: Driver Side; Passenger Side
- Other Names: Switch
- Item Dimensions: 2.3 x 2.3 x 1.6 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Cadillac CTS Switch Asm, Rear Compartment Lid Release *Ebony
Vehicle Fitment- 2004 Cadillac CTS | Base, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
OEM (Genuine) 2004 Cadillac CTS Switch Asm-Rear Compartment Lid Release *Neutral
PartNumber: 25721203
Product Specifications- Notes: Trunk Lid Release, Neutral
- Location: Driver Side; Passenger Side
- Other Names: Lock Switch, Switch
- Item Dimensions: 2.2 x 2.3 x 1.7 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Cadillac CTS Switch Asm-Rear Compartment Lid Release *Neutral
Vehicle Fitment- 2004 Cadillac CTS | Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
OEM (Genuine) 2004 Cadillac CTS Switch Asm-Rear Compartment Lid Release *Light Gray
PartNumber: 25721205Product Specifications- Notes: Trunk Lid Release, Gray
- Location: Driver Side; Passenger Side
- Other Names: Lock Switch, Switch
- Item Dimensions: 2.3 x 2.2 x 1.6 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Cadillac CTS Switch Asm-Rear Compartment Lid Release *Light Gray
Vehicle Fitment- 2004 Cadillac CTS | Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
FAQ for Door Lock Switch Repair
Q: How to install the power door lock switch?
A:
You should snap the door lock switch into the door switch bezel, connect the electrical connector, slide the bezel over the door handle, and then snap the bezel into position by pushing on the lower front corner of the bezel.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the door control module?
A:
The procedure is to remove the door trim panel, remove the door control module by releasing the retainer tabs, and then disconnect the electrical connectors from the control module.
By Bob
GM Specialist
01/11/2022Q: How to remove the power door lock switch?
A:
You should remove the inside handle bezel from the inner door panel, and then disconnect the electrical connector from the lock switch.
By Bob
GM Specialist
01/11/2022Q: What should be done to install the front door switch?
A:
You should snap the switch into the bezel, connect the electrical connectors, install the switch into the door trim panel, engage the rear of the switch to the door panel, and then press down on the switch plate evenly to engage the retainer.
By Bob
GM Specialist
01/11/2022Q: How to install the door lock switch?
A:
You should snap the door lock switch into the door switch bezel, connect the electrical connector, slide the bezel over the door handle, and then snap the bezel into position by pushing on the lower front corner of the bezel.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the door control module?
A:
The proper way is to connect the electrical connectors to the control module, snap the door module onto the mounting studs, install the door trim panel, and then reprogram the front door module.
By Bob
GM Specialist
01/11/2022Q: How to remove the door lock switch?
A:
You should remove the inside handle bezel from the inner door panel, and then disconnect the electrical connector from the lock switch.
By Bob
GM Specialist
01/11/2022Q: What should be done to remove the front door switch?
A:
You should insert a flat-bladed tool under the front edge of the front door switch, push the tool firmly towards the switch to disengage the retainer, lift on the rear of the switch plate to remove it from the door trim panel, disconnect electrical connectors, and then remove the appropriate switch from the bezel by disengaging the side snap walls with a small flat-bladed tool.
By Bob
GM Specialist
01/11/2022See more FAQs (3)