< Back ×
My Vehicle Change Vehicle
2004 Cadillac DeVille
< Back to View All
Steering Racks & Gearboxes
- Department
- Prices
OEM (Genuine) 2004 Cadillac DeVille Gear Kit, Steering (Remanufacture)
PartNumber: 19330448
Product Specifications- Notes: All Models; All; All
- Item Dimensions: 51.5 x 11.0 x 6.2 inches
- Item Weight: 22.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19169230, 26098942, 26067451, 26099972, 26088606
- Part Description: 2004 Cadillac DeVille Gear Kit, Steering (Remanufacture)
Vehicle Fitment- 2004 Cadillac DeVille | Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS
FAQ for Steering Gearbox Repair
Q: What is the proper way to adjust the rack and pinion gear rack bearing preload-off vehicle (magnasteer)?
A:
The proper way is to loosen the adjuster plug lock nut, turn the adjuster plug clockwise until the adjuster plug bottoms in the gear assembly, turn the adjuster plug back 50 degrees to 70 degrees, and install the adjuster plug lock nut.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the power steering gear heat shield?
A:
The proper way is to install the power steering gear heat shield, the power steering gear heat shield mounting bolts, the electrical harness clip, and the stabilizer shaft links.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to remove the power steering gear heat shield?
A:
The proper way is to remove the stabilizer shaft links, the electrical harness clip, the power steering gear heat shield mounting bolts, and the power steering gear heat shield.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the rack and pinion boot-on vehicle?
A:
The proper way is to install the rack and pinion boot, a new rack and pinion boot clamp, the tie rod end clamp, the outer tie rod, and the tire and wheel.
By Bob
GM Specialist
01/11/2022Q: What kind of tools will be required in the replacement of the power steering gear?
A:
The tools required include J 42640 Steering Column Antirotation Pin and J 24319-B Steering Linkage and Tie Rod Puller.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the steering gear cylinder pipe assemblies/O-Ring seals?
A:
The procedure is to remove both cylinder line assemblies from the rack and pinion gear assembly, and the O-ring seals from the valve end of the line.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to remove the rack and pinion boot-on vehicle?
A:
The proper way is to remove the tire and wheel, the outer tie rod, the tie rod end clamp, the rack and pinion boot clamp, and the rack and pinion boot.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the steering gear cylinder pipe assemblies/O-Ring seals?
A:
The procedure is to install the new O-ring seals to the valve end of the cylinder lines, and the cylinder line assemblies to the gear assembly.
By Bob
GM Specialist
01/11/2022Q: What kind of tools will be required in the replacement of the rack and pinion boot and breather tube-off vehicle?
A:
The tools required include J22610 Keystone Clamp Pliers.
By Bob
GM Specialist
01/11/2022Q: What should be noticed while removing the rack and pinion boot and breather tube-off vehicle?
A:
If a breather tube is present, you shall mark the location of the breather tube on the gear assembly before the removal of the rack and pinion boot.
By Bob
GM Specialist
01/11/2022See more FAQs (6)