< Back ×
My Vehicle Change Vehicle
2004 Cadillac DeVille
< Back to View All
Air Filters & Intake Systems
- Department
- Prices
OEM (Genuine) 2004 Cadillac DeVille Throttle Body Assembly
PartNumber: 12560099
Product Specifications- Notes: All Models; 4.6L
- Other Names: Throttle Body
- Item Dimensions: 8.3 x 5.7 x 4.2 inches
- Item Weight: 2.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Cadillac DeVille Throttle Body Assembly
Vehicle Fitment- 2004 Cadillac DeVille | Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS
FAQ for Throttle Body Repair
Q: What is the proper way to remove the accelerator control cable?
A:
The proper way is to install the accelerator control cable and the left closeout insulator panel.
By Bob
GM Specialist
02/11/2022Q: What should be noticed before installing the throttle body assembly?
A:
You must not reuse the old throttle body gasket.
By Bob
GM Specialist
02/11/2022Q: What is the installation procedure for the accelerator controls cable bracket?
A:
The procedure is to install the accelerator controls cable bracket and bolts, and connect the fuel feed and fuel return fuel pipes, the cruise control cable and the accelerator controls cable.
By Bob
GM Specialist
02/11/2022Q: What is the proper way to install the throttle body?
A:
The proper way is to install the MAF sensor and air cleaner intake duct and connect the MAF sensor electrical connector.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the throttle body?
A:
The procedure is to disconnect the MAF sensor electrical connector, loosen the intake air duct clamps, and remove the mass air flow (MAF) sensor and air cleaner intake duct.
By Bob
GM Specialist
02/11/2022Q: What should be noted when removing the throttle body assembly?
A:
You must not damage the MAF sensor screen. A damaged screen could restrict airflow and lead to a driveability concern.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the accelerator controls cable bracket?
A:
The procedure is to disconnect the accelerator cable, the fuel feed, and fuel return fuel pipes, and remove the upper throttle body bolt and the bolts from the accelerator control cable bracket.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the idle air control (LAC) valve?
A:
The procedure is to remove the electrical connector, the IAC valve, and the IAC valve O-ring.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the idle air control (IAC) valve?
A:
The proper way is to install the new IAC valve O-ring, the IAC valve, and the electrical connector.
By Bob
GM Specialist
01/11/2022See more FAQs (4)