2004 Cadillac Escalade EXT Door Armrest

You need to remove the radio amp fuse located under the hood electrical center, the floor console bezel, the cupholder, the bolts retaining the console to the I/P, the console storage bin, and the Center Console end panel. You also need to remove the 4 screws retaining the upper console bracket to the lower console bracket, move both front seats to the full forward, reposition the inboard seat track trim, remove both rear console side panel screws, move both front seats, remove both front console side panel screws, disconnect the floor console electrical connector, and remove the console assembly from the vehicle.

You need to remove the console bezel assembly, the blower assembly, the four retaining screws, and the plastic cover, and slide the heat/cool unit from the front of the Cup Holder assembly.

You need to connect the electrical connector, install the upper garnish molding, and the plastic push pins to the upper garnish molding, and install the third pillar trim panels and the rear window to the vehicle.