< Back ×
My Vehicle Change Vehicle
2004 Cadillac Escalade EXT
< Back to View All
Hoods
- Department
- Brands
- Prices
OEM (Genuine) 2004 Cadillac Escalade EXT Latch
PartNumber: 15756432
Product Specifications- Notes: Escalade Ext
- Other Names: Latch, Lock
- Item Dimensions: 5.7 x 5.8 x 3.8 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15706108
- Part Description: Latch
$55.22 MSRP:$83.32You Save: $28.10 (34%)
Dorman® OE Solutions Hood Latch for 2004 Cadillac Escalade EXT
PartNumber: 820-201Product Specifications- Notes: Packaging Type: Box; Pkg Quantity: 1
- Attachment Method: Bolt And Screw
- Installation Instructions Included: No
- OE Part Number: 15756432, 15706108
- Package Contents: Hood Latch
- UPC: 885484697560
- Part Description: OE Solutions Hood Latch
$45.72
FAQ for Hood Latch Repair
Q: What is the removal procedure for the hood latch?
A:
You need to raise the hood, remove the upper radiator support baffle and the bolts from the hood release latch, disconnect the hood ajar indicator switch connector and the hood release cable end from the latch, and remove the hood release latch from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the hood like?
A:
You need to raise and support the front of the hood, remove the bolts holding the hood link assembly to the hood hinge, the bolts holding the hood link assembly to the fender, and the hood link assembly from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the recommended bolt torque for the fender bolt?
A:
The recommended bolt torque is 25 Nm (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended bolt torque for the hood latch bolts?
A:
The recommended bolt torque is 9 Nm (80 lb in).
By Bob
GM Specialist
01/11/2022Q: What should be caution when replacing the hood link?
A:
When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the hood rear seal?
A:
You need to align the slot in the rear hood seal with the cowl pinch-weld flange and press it into place.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the rear hood seal?
A:
You need to pull up the rear hood seal and remove it from the cowl pinch-weld flange.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the hood bumper?
A:
You need to remove the front hood bumper by turning the front hood bumper out counterclockwise and the side hood bumper by sliding the side hood bumper rearward and pulling up.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the hood bumper?
A:
You need to install the side hood bumper by pushing down and sliding the side hood bumper forward and the front hood bumper by turning the front hood bumper clockwise until the hood closes flush with the fender.
By Bob
GM Specialist
01/11/2022See more FAQs (4)