< Back ×
My Vehicle Change Vehicle
2004 Cadillac Escalade EXT
< Back to View All
Interior & Exterior Trim
- Department
- Prices
OEM (Genuine) 2004 Cadillac Escalade EXT Seat Cushion Pad
PartNumber: 19330710
Product Specifications- Notes: Bucket Seat, Driver Side
- Location: Driver Side
- Other Names: Seat Cushion Pad
- Item Dimensions: 27.1 x 23.4 x 8.5 inches
- Item Weight: 1.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 88941606
- Part Description: Seat Cushion Pad
$114.90 MSRP:$173.31You Save: $58.41 (34%)
OEM (Genuine) 2004 Cadillac Escalade EXT Seat Cushion Pad
PartNumber: 19330711
Product Specifications- Notes: Bench Seat, Driver Seat
- Location: Driver Side
- Other Names: Seat Cushion Pad
- Item Dimensions: 8.6 x 27.4 x 23.1 inches
- Item Weight: 2.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 88941608
- Part Description: Seat Cushion Pad
$161.68 MSRP:$243.89You Save: $82.21 (34%)
OEM (Genuine) 2004 Cadillac Escalade EXT Pad, Rear Seat Cushion
PartNumber: 88941584
Product Specifications- Notes: Left Side
- Location: Driver Side
- Other Names: Seat Cushion Pad
- Item Dimensions: 38.5 x 23.1 x 8.5 inches
- Item Weight: 34.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: Pad, Rear Seat Cushion
OEM (Genuine) 2004 Cadillac Escalade EXT Pad, Passenger Seat Cushion
PartNumber: 88941609
Product Specifications- Notes: Bench Seat, Passenger Seat; Bucket Seat, Passenger Side
- Location: Passenger Side
- Other Names: Module, Seat Cushion Pad
- Item Dimensions: 24.1 x 23.9 x 8.1 inches
- Item Weight: 2.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: Pad, Passenger Seat Cushion
OEM (Genuine) 2004 Cadillac Escalade EXT Pad, Front Center Seat Cushion
PartNumber: 88936413
Product Specifications- Notes: Bench Seat, Center Seat
- Other Names: Seat Cushion Pad
- Item Weight: 1.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: Pad, Front Center Seat Cushion
OEM (Genuine) 2004 Cadillac Escalade EXT Pad, Rear Seat Cushion
PartNumber: 88941585
Product Specifications- Notes: Right Side
- Location: Passenger Side
- Other Names: Seat Cushion Pad
- Item Dimensions: 22.1 x 21.9 x 8.1 inches
- Item Weight: 2.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: Pad, Rear Seat Cushion
FAQ for Seat Cushion Pad Repair
Q: What is the recommended torque for the bolts on the roller assembly?
A:
The recommended torque is 53 Nm (39 lb-ft).
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the center screw retaining the latch cover?
A:
The recommended torque is 2 Nm (18 lb in).
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the rear seat cushion cover and pad (Bench)?
A:
You need to remove the rear seat from the vehicle, the J-Clips from the back of the seat, the bolts from the grab handle, and the support rod from the bottom of the seat, then loosen the bolts on the roller assembly, and remove the seat cushion cover and pad from the seat frame.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the rear seat cushion cover and pad (60/40 Split-50/50 Split)?
A:
You need to remove the rear passenger seat from the vehicle, remove the rear passenger seat riser, the seat cushion plastic cover, the hog rings and/or the J-clips, disconnect the rear heater connector, remove the seat belt buckles and all of the remaining hog rings, and/or the J-clips, release the hook, and the loop-strips, and remove the center screw retaining the latch cover and the seat cushion cover from the foam pad.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the seat cushion cover and pad in the rear (60/40 Split-50/50 Split)?
A:
You need to remove the rear passenger seat from the vehicle, the rear passenger seat riser, the seat cushion plastic cover, and the hog rings and/or the J-clips, disconnect the rear heater connector, remove the seat belt buckles, all of the remaining hog rings, and/or the J-clips, release the hook, and the loop-strips, and remove the center screw and the seat cushion cover from the foam pad.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the seat cushion in the front?
A:
You need to remove the seat trim panel, the seat cushion trim cover and pad, the frame springs, the frame suspension, and the plastic retainers from the seat cushion frame, and remove the seat cushion frame from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the filter in the front seat cushion?
A:
You need to install the filter from the module and remove the seat cushion.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the blower of ventilation heat and cooling in the front seat cushion?
A:
You need to remove the seat cushion, disconnect the blower electrical connector, cut the tie straps securing the blower bracket to the seat cushion frame, remove the blower and bracket assembly from the seat cushion, drill the rivets retaining the blower to the bracket, and remove the blower from the bracket.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the module of ventilation heat and cooling in the seat cushion?
A:
You need to connect the wire connectors to the module, slide the module rearwards till it clicks in place, and install the wire connector to the bracket and the console cup holder assembly.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the seat cushion trim cover and pad?
A:
You need to remove the front nuts and the front seat trim panel, unsnap the lumbar cable, disconnect the electrical connectors, remove the pressure sensor, lift the seat cushion off the rear plastic holders, remove the seat switch bezel and the lumbar actuator, unclip the seat trim cover, separate the seat cushion trim cover, replace the Inflatable Restraint Passenger Presence System if replacing the front passenger seat cushion, and remove the pad and the seat cushion heater element.
By Bob
GM Specialist
01/11/2022See more FAQs (19)