< Back ×
2004 Cadillac Escalade EXT Wheel Seal
My Vehicle Change Vehicle
2004 Cadillac Escalade EXT
< Back to View All
Wheel Hubs, Bearings & Seals
- Department
- Brands
- Prices
$5.50Product Specifications- Bore: 3.54"
- Boretite: No
- Outer Diameter: 3.546"
- Shaft: 3.0750"
- UPC: 085311153768
- Width: 0.38"
- Part Description: Front Wheel Seal
$5.45Product Specifications- Bore: 2.841"
- Boretite: Yes
- Outer Diameter: 2.849"
- Shaft: 1.6180"
- UPC: 085311993036
- Width: 0.5"
- Part Description: Rear Wheel Seal
$5.60Product Specifications- Notes: w/Borg-Warner 4481 Transfer Case; 1Spd; Full Time 4WD
- Type: 33
- UPC: 724956093410
- Part Description: Wheel Seal
$12.23 MSRP:$22.22You Save: $9.99 (45%)Product Specifications- Notes: 1500; All Models; 8.50, 8.625
- Location: Driver Side; Passenger Side
- Item Dimensions: 3.6 x 3.7 x 0.7 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26037309, 15522060
- Part Description: Axle Seal
$29.08 MSRP:$54.88You Save: $25.80 (48%)Product Specifications- Notes: All Models; 10.50, 11.50; 2500
- Location: Driver Side; Passenger Side
- Other Names: Axle Seal, Hub Seal
- Item Dimensions: 4.7 x 3.4 x 0.8 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26061024, 15007008
- Part Description: Axle Seal
$15.50 MSRP:$29.22You Save: $13.72 (47%)Product Specifications- Notes: All Models; 9.50
- Item Dimensions: 4.0 x 3.8 x 0.7 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26057167, 14047298, 15522062
- Part Description: Axle Seal
FAQ for Wheel Seal Repair
Q: What is the removal procedure for the wheel hub, bearing, and seal (RWD)?
A:
You need to raise and support the vehicle, remove the tire and wheel, the rotor, the wheel speed sensor, and brake hose mounting bracket bolt, remove the wheel hub and bearing 15-series mounting bolts, the wheel hub and bearing mounting bolts, the wheel hub, and bearing and splash shield, the O-ring seal and the wheel speed sensor mounting bolt, clean and inspect the O-ring seal, and replace the seal.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the brake hose clip bolt?
A:
The recommended torque is 12 Nm (106 inch lbs.).
By Bob
GM Specialist
01/11/2022