< Back ×
My Vehicle Change Vehicle
2004 Cadillac Seville
< Back to View All
Air Filters & Intake Systems
- Department
- Prices
OEM (Genuine) 2004 Cadillac Seville Throttle Body Assembly
PartNumber: 12560099
Product Specifications- Notes: Seville
- Other Names: Throttle Body
- Item Dimensions: 8.3 x 5.7 x 4.2 inches
- Item Weight: 2.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: Throttle Body Assembly
FAQ for Throttle Body Repair
Q: How do you install the accelerator controls cable?
A:
You can install the accelerator control cable at the throttle body lever, install the accelerator control cable at the accelerator controls cable bracket, route the accelerator control cable over the brake master cylinder and through the bulkhead, secure the accelerator control cable at the retainer on the bulkhead, install the accelerator control cable at accelerator controls pedal and install the left closeout insulator panel.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the accelerator cable bracket bolts?
A:
The recommended torque is 12 Nm (106 lb in).
By Bob
GM Specialist
02/11/2022Q: What should be noticed when servicing the accelerator controls cable?
A:
The accelerator control cable must be routed through the groove in the throttle body lever and seated securely.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the upper throttle body bolt?
A:
The recommended torque is 12 Nm (106 lb in).
By Bob
GM Specialist
02/11/2022Q: What should be noticed when servicing the throttle body assembly?
A:
Do not damage the MAF sensor screen. A damaged screen could restrict airflow and lead to a driveability concern.
By Bob
GM Specialist
02/11/2022Q: What is the installation procedure for the accelerator controls cable bracket?
A:
You should install the accelerator controls cable bracket and bolts, install the upper throttle body bolt, connect the fuel feed and fuel return fuel pipes to the retainer, connect the transaxle vent hose clip to the accelerator controls cable bracket, connect the cruise control cable from the accelerator controls cable bracket, and connect the accelerator controls cable from the accelerator controls cable bracket.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the intake air duct clamps?
A:
The recommended torque is 3 Nm (27 lb in).
By Bob
GM Specialist
02/11/2022Q: What should be noticed when servicing the throttle body?
A:
Do not damage the MAF sensor screen. A damaged screen could restrict airflow and lead to a driveability concern.
By Bob
GM Specialist
02/11/2022Q: What should you do before servicing the Idle Air Control Valve?
A:
You should remove the electrical connector from the IAC valve.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the A/C valve attaching screws?
A:
The recommended torque is 3 N.m (27 lb in).
By Bob
GM Specialist
01/11/2022See more FAQs (5)