< Back ×
My Vehicle Change Vehicle
2004 Cadillac SRX
< Back to View All
Lift Supports
- Department
- Brands
- Prices
OEM (Genuine) 2004 Cadillac SRX Support Cylinder
PartNumber: 15872899
Product Specifications- Location: Passenger Side
- Other Names: Lift Cylinder, Support Cylinder
- Item Dimensions: 21.7 x 1.5 x 1.0 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25736514
- Part Description: 2004 Cadillac SRX Support Cylinder
Vehicle Fitment- 2004 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
$32.33 MSRP:$51.35You Save: $19.02 (38%)
StrongArm® Liftgate Lift Support for 2004 Cadillac SRX
PartNumber: 6116Product Specifications- Body: 22.00
- BODY CONNECTION: ball socket (nylon) 16 degree
- Brackets: No
- Compressed Length: 12.97
- Extended Length: 19.77
- Force: 138.00
- Hardware Kit: No
- High Performance Item: N
- Internal Springs: No
- Is Application Specific: Y
- Material: Heavy gauge steel pressure tube provides long life; Rubber o-ring piston seal for controlled lift; Teflon backup ring gives enhanced performance
- Shaft: 10.00
- SHAFT CONNECTION: ball socket (nylon) 16 degree
- Stroke: 6.80
- UPC: 845998004025
- Part Description: 2004 Cadillac SRX Liftgate Lift Support
Vehicle Fitment- 2004 Cadillac SRX | All Trims | All Engines
$18.40OEM (Genuine) 2004 Cadillac SRX Support Cylinder
PartNumber: 15872898
Product Specifications- Location: Driver Side
- Other Names: Lift Cylinder, Support Cylinder
- Item Dimensions: 23.3 x 3.0 x 1.0 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25736515
- Part Description: 2004 Cadillac SRX Support Cylinder
Vehicle Fitment- 2004 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
$32.33 MSRP:$51.35You Save: $19.02 (38%)
FAQ for Liftgate Lift Support Repair
Q: What is the proper way to install the liftgate strut ball stud?
A:
You can install the upper assist rod ball stud, the lower ball stud, and the assist rod.
By Bob
GM Specialist
01/11/2022Q: How do you install the liftgate strut?
A:
You can press the liftgate assist rod onto the upper liftgate assist rod ball stud and the lower assist rod ball stud, ensure that both clips are fully seated on the liftgate assist rod, install the tail lamp and close the liftgate.
By Bob
GM Specialist
01/11/2022Q: How do you replace the liftgate strut ball stud?
A:
You can open the liftgate and remove the assist rod, the lower liftgate assists rod ball stud, and the upper liftgate assists rod ball stud.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the liftgate strut?
A:
The procedure is to open the liftgate, remove the tail lamp, release the liftgate assist rod to the lower assist rod ball stud and the upper assist rod ball stud and remove the liftgate assist rod.
By Bob
GM Specialist
01/11/2022