< Back ×
2004 Cadillac SRX Ring And Pinion
My Vehicle Change Vehicle
2004 Cadillac SRX
< Back to View All
Driveline, Axles & 4WD
- Department
- Prices
Product Specifications- Notes: Srx; Srx; W/O Rear Positraction; AWD; 4.6l
- Item Dimensions: 10.5 x 8.8 x 8.8 inches
- Item Weight: 14.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 89059049, 89048203
- Part Description: 2004 Cadillac SRX Differential Assembly
Vehicle Fitment- 2004 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2004 Cadillac SRX Gear Set, Differential Ring & Drive Pinion (3.90 Ratio)
PartNumber: 89048143Product Specifications- Notes: Srx; 3.23 Ratio; AWD; 3.6l;Srx; 3.91 Ratio
- Other Names: Ring Pinion
- Item Dimensions: 10.2 x 10.0 x 9.0 inches
- Item Weight: 17.50 Pounds
- Part Description: 2004 Cadillac SRX Gear Set, Differential Ring & Drive Pinion (3.90 Ratio)
Vehicle Fitment- 2004 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
- Product Specifications
- Notes: Srx; 3.23 Ratio; RWD; 3.6l
- Other Names: Ring Pinion
- Item Dimensions: 15.6 x 14.3 x 7.5 inches
- Item Weight: 16.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 89048145
- Part Description: 2004 Cadillac SRX Gear Set, Differential Ring & Drive Pinion
Vehicle Fitment- 2004 Cadillac SRX | Base | 6 Cyl 3.6 L GAS
- Product Specifications
- Notes: Srx; 3.23 Ratio; AWD; 4.6l
- Other Names: Ring Pinion
- Item Dimensions: 9.9 x 9.7 x 8.5 inches
- Item Weight: 15.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 89048144
- Part Description: 2004 Cadillac SRX Gear Set, Differential Ring & Drive Pinion
Vehicle Fitment- 2004 Cadillac SRX | Base | 8 Cyl 4.6 L GAS
FAQ for Ring And Pinion Repair
Q: How do you disassemble the ring gear and differential housing?
A:
You can remove the 10 ring gear bolts and the ring gear, the left side bearing, and the right side bearing.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when you install the 10 NEW ring gear bolts?
A:
You can tighten the 10-ring gear bolts slowly in a criss-cross pattern to 190 Nm (140 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: What should you inspect the ring gear for?
A:
You should inspect the ring gear for damage to the threaded holes and unusual wear or heat discoloration to the gear teeth.
By Bob
GM Specialist
01/11/2022Q: What is the first step for inspecting the pinion and ring gear?
A:
The first step is to clean the pinion gear in a solvent.
By Bob
GM Specialist
01/11/2022