< Back ×
My Vehicle Change Vehicle
2004 Cadillac XLR
< Back to View All
Hoods
- Department
- Prices
OEM (Genuine) 2004 Cadillac XLR Rear Compartment Lid Latch Assembly
PartNumber: 15847487
Product Specifications- Other Names: Latch, Lock
- Item Dimensions: 24.5 x 5.1 x 4.9 inches
- Item Weight: 5.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15227201, 10346756, 10352891
- Part Description: Rear Compartment Lid Latch Assembly
$402.82 MSRP:$607.70You Save: $204.88 (34%)
OEM (Genuine) 2004 Cadillac XLR Latch Asm-Hood Primary & Secondary
PartNumber: 15910870
Product Specifications- Other Names: Latch, Lock
- Item Dimensions: 16.1 x 11.1 x 8.8 inches
- Item Weight: 1.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15233603, 10342003
- Part Description: Latch Asm-Hood Primary & Secondary
FAQ for Hood Latch Repair
Q: What's the installation procedure for the hood latch?
A:
The installation procedure is to install the hood latch, and the bolts attaching the latch, then connect the hood release cable to the latch and connect the secondary latch cable to the latch, lower the hood and adjust the latch, install the front section of the air cleaner assembly and close the hood.
By Bob
GM Specialist
01/11/2022Q: How do you remove the hood latch?
A:
You can remove the front section of the air cleaner assembly and disconnect the hood release cable and the secondary hood latch cable from the hood latch, and remove the bolts attaching the hood latch and the latch.
By Bob
GM Specialist
01/11/2022Q: What should be done before removing the hood latch?
A:
You will need to open the hood.
By Bob
GM Specialist
01/11/2022Q: How do you remove the secondary hood latch?
A:
You can remove the front section of the air cleaner assembly, disconnect the secondary hood latch cable from the hood latch, and remove the bolts attaching the secondary hood latch and the secondary latch.
By Bob
GM Specialist
01/11/2022Q: What should be done before removing the hood hinge?
A:
You will need to open the hood and mark the location of the upper and lower hood hinge on the underside of the hood and the front structure.
By Bob
GM Specialist
01/11/2022Q: How do you remove the hood hinge?
A:
You can remove the hood, the bolts, and the hood hinge.
By Bob
GM Specialist
01/11/2022Q: How do you remove the hood rear seal?
A:
You can remove the rear hood seal from the lower plenum.
By Bob
GM Specialist
01/11/2022Q: What should be done before removing the secondary hood latch?
A:
You will need to open the hood.
By Bob
GM Specialist
01/11/2022Q: What is the recommended bolt torque for the bolts securing the lower hood hinge to the front structure?
A:
The recommended torque is 24N.m (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What should be done before removing the fender from the hood seal?
A:
You will need to open the hood.
By Bob
GM Specialist
01/11/2022See more FAQs (14)