< Back ×
My Vehicle Change Vehicle
2004 Chevrolet S10
< Back to View All
Ball Joints
- Department
- Greasable
- Brands
- Prices
OEM (Genuine) 2004 Chevrolet S10 Lower Ball Joint
PartNumber: 88967425
Product Specifications- Notes: 4WD
- Location: Driver Side; Passenger Side
- Other Names: Lower Ball Joint
- Item Dimensions: 7.1 x 4.3 x 4.3 inches
- Item Weight: 1.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22156908, 17980954
- Part Description: 2004 Chevrolet S10 Lower Ball Joint
Vehicle Fitment- 2004 Chevrolet S10 | Baja, Base, Durango, EL, LS, Sport, SS, Tahoe, Xtreme, ZR2, ZR5 | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
$64.89 MSRP:$107.41You Save: $42.52 (40%)
Delphi® Front Upper Bolt On Ball Joint for 2004 Chevrolet S10
PartNumber: TC2202Product Specifications- Greasable: No
- Material: Steel
- Stud Type: Threaded
- UPC: 689604275115
- Part Description: 2004 Chevrolet S10 Front Upper Bolt On Ball Joint
Vehicle Fitment- 2004 Chevrolet S10 | All Trims | All Engines
$26.75
OEM (Genuine) 2004 Chevrolet S10 Ball Joint
PartNumber: 88911387
Product Specifications- Notes: Blazer/Sonoma/S10
- Other Names: Ball Joint, Upper Ball Joint
- Item Dimensions: 4.4 x 4.1 x 3.7 inches
- Item Weight: 1.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 88965476, 9767112, 09767112
- Replaced by: 19460397
- Part Description: 2004 Chevrolet S10 Ball Joint
Vehicle Fitment- 2004 Chevrolet S10 | Baja, Base, Durango, EL, LS, Sport, SS, Tahoe, Xtreme, ZR2, ZR5 | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
$29.58 MSRP:$53.56You Save: $23.98 (45%)
Centric® Premium™ Front Lower Ball Joint for 2004 Chevrolet S10
PartNumber: 610.66007Product Specifications- UPC: 805890788669
- Part Description: 2004 Chevrolet S10 Premium™ Front Lower Ball Joint
Vehicle Fitment- 2004 Chevrolet S10 | All Trims | All Engines
$19.01
Centric® Premium™ Front Upper Ball Joint for 2004 Chevrolet S10
PartNumber: 610.66008Product Specifications- UPC: 805890788676
- Part Description: 2004 Chevrolet S10 Premium™ Front Upper Ball Joint
Vehicle Fitment- 2004 Chevrolet S10 | All Trims | All Engines
$17.80
OEM (Genuine) 2004 Chevrolet S10 Upper Ball Joints
PartNumber: 19133669
Product Specifications- Notes: 4WD; Blazer/Sonoma/S10
- Location: Driver Side; Passenger Side
- Other Names: Upper Ball Joint
- Item Dimensions: 7.0 x 4.5 x 4.3 inches
- Item Weight: 1.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 17980952
- Part Description: 2004 Chevrolet S10 Upper Ball Joints
Vehicle Fitment- 2004 Chevrolet S10 | Baja, Base, Durango, EL, LS, Sport, SS, Tahoe, Xtreme, ZR2, ZR5 | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 2004 Chevrolet S10 STUD KIT, FRT LWR CONT ARM BALL
PartNumber: 19416895
Product Specifications- Notes: Blazer/Sonoma/S10
- Other Names: Ball Joint, Lower Ball Joint
- Item Dimensions: 7.0 x 4.3 x 4.3 inches
- Item Weight: 1.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 9767281, 19122185, 09767281
- Part Description: 2004 Chevrolet S10 STUD KIT, FRT LWR CONT ARM BALL
Vehicle Fitment- 2004 Chevrolet S10 | Baja, Base, Durango, EL, LS, Sport, SS, Tahoe, Xtreme, ZR2, ZR5 | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
FAQ for Ball Joint Repair
Q: What is the proper way to install the Lower Ball Joint (4WD)?
A:
The proper way is to install the lower ball joint, the wheel drive shaft, and the tire and the wheel.
By Bob
GM Specialist
29/10/2022Q: What should be noted when inspecting the Ball Joint?
A:
You must not support the lower control arm with a jack stand for an RWD vehicle.
By Bob
GM Specialist
29/10/2022Q: What is the installation procedure for the Upper Ball Joint (4WD)?
A:
The procedure is to install the upper ball joint, the new cotter pin, the wheel speed sensor wiring harness bracket, and the tire and the wheel.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the Lower Ball Joint (4WD)?
A:
The procedure is to remove the tire and wheel, the wheel drive shaft, the rivets, and the lower ball joint.
By Bob
GM Specialist
29/10/2022Q: What kind of tools will be required while inspecting the Ball Joint?
A:
The tools required include J 8001 Dial Indicator.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the Upper Ball Joint (4WD)?
A:
The procedure is to remove the tire and wheel, the wheel speed sensor wiring harness bracket, the cotter pin, the upper ball joint, the rivets, and the upper ball joint.
By Bob
GM Specialist
29/10/2022See more FAQs (1)