< Back ×
My Vehicle Change Vehicle
2004 Chevrolet S10
< Back to View All
Driveline, Axles & 4WD
- Department
- Brands
- Prices
OEM (Genuine) 2004 Chevrolet S10 Pinion Seal
PartNumber: 26064028
Product Specifications- Notes: Blazer/Sonoma/S10
- Other Names: Pinion Seal
- Item Dimensions: 3.9 x 4.0 x 0.6 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Chevrolet S10 Pinion Seal
Vehicle Fitment- 2004 Chevrolet S10 | Base, LS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
$30.32 MSRP:$50.20You Save: $19.88 (40%)
SKF® Rear Differential Pinion Seal for 2004 Chevrolet S10
PartNumber: 15315Product Specifications- Notes: 1.500" Shaft; w/7.62" Ring Gear
- Bore: 2.656"
- Boretite: No
- Outer Diameter: 2.66"
- Shaft: 1.5240"
- UPC: 085311308243
- Width: 0.607"
- Part Description: 2004 Chevrolet S10 Rear Differential Pinion Seal
Vehicle Fitment- 2004 Chevrolet S10 | All Trims | All Engines
$11.90OEM (Genuine) 2004 Chevrolet S10 Pinion Seal
PartNumber: 12471523
Product Specifications- Notes: S-Series
- Other Names: Pinion Seal
- Item Dimensions: 4.5 x 4.6 x 0.9 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Chevrolet S10 Pinion Seal
Vehicle Fitment- 2004 Chevrolet S10 | Base, LS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
$12.62 MSRP:$23.81You Save: $11.19 (47%)
SKF® Front Differential Pinion Seal for 2004 Chevrolet S10
PartNumber: 15306Product Specifications- Notes: 7.25" Ring Gear
- Bore: 2.656"
- Boretite: No
- Outer Diameter: 2.66"
- Shaft: 1.520"
- UPC: 085311015523
- Width: 0.425"
- Part Description: 2004 Chevrolet S10 Front Differential Pinion Seal
Vehicle Fitment- 2004 Chevrolet S10 | All Trims | All Engines
$11.69
SKF® Rear Differential Pinion Seal for 2004 Chevrolet S10
PartNumber: 21285Product Specifications- Notes: 2nd Design 8.50" & 8.625" Ring Gears:
- Bore: 2.763"
- Boretite: No
- Outer Diameter: 2.767"
- Shaft: 2.1250"
- UPC: 085311373760
- Width: 0.5"
- Part Description: 2004 Chevrolet S10 Rear Differential Pinion Seal
Vehicle Fitment- 2004 Chevrolet S10 | All Trims | All Engines
$8.91
SKF® Rear Differential Pinion Seal for 2004 Chevrolet S10
PartNumber: 17407Product Specifications- Notes: Triple Lib; w/7.62" Ring Gear
- Bore: 2.653"
- Boretite: No
- Outer Diameter: 2.658"
- Shaft: 1.7320"
- UPC: 085311373609
- Width: 0.547"
- Part Description: 2004 Chevrolet S10 Rear Differential Pinion Seal
Vehicle Fitment- 2004 Chevrolet S10 | All Trims | All Engines
$6.73
FAQ for Differential Seal Repair
Q: What should be noticed When removing the propeller shaft?
A:
You must not attempt to remove the shaft by pounding on the yoke ears or using a tool between the yoke and the universal joint.
By Bob
GM Specialist
29/10/2022Q: What kind of tools will be required in the replacement of the Front Differential Drive Pinion Flange Yoke, Seal, and Dust Deflector?
A:
The tools required include J33782 Pinion Seal Installer and J8614-01 Flange and Pulley Holding Tool.
By Bob
GM Specialist
29/10/2022