< Back ×
My Vehicle Change Vehicle
2004 Chevrolet S10
< Back to View All
Door Sheet Metal, Moldings & Weatherstrips
- Department
- Prices
OEM (Genuine) 2004 Chevrolet S10 Surround Weatherstrip
PartNumber: 15100041
Product Specifications- Location: Passenger Side
- Other Names: Door Weatherstrip, Surround Weatherstrip
- Item Dimensions: 4.7 x 18.1 x 17.3 inches
- Item Weight: 2.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15757260, 15192853, 15756983, 15735053
- Part Description: 2004 Chevrolet S10 Surround Weatherstrip
Vehicle Fitment- 2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
$62.92 MSRP:$94.94You Save: $32.02 (34%)
OEM (Genuine) 2004 Chevrolet S10 Weatherstrip Asm-Rear Side Door
PartNumber: 15100044
Product Specifications- Notes: Crew Cab, Door Opening
- Location: Passenger Side; Driver Side
- Other Names: Weatherstrip
- Item Dimensions: 3.1 x 17.6 x 17.6 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15192856, 15761429
- Part Description: 2004 Chevrolet S10 Weatherstrip Asm-Rear Side Door
Vehicle Fitment- 2004 Chevrolet S10 | Base, LS, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
$18.47 MSRP:$35.95You Save: $17.48 (49%)OEM (Genuine) 2004 Chevrolet S10 Surround Weatherstrip
PartNumber: 15100042
Product Specifications- Location: Driver Side
- Other Names: Door Weatherstrip, Surround Weatherstrip
- Item Dimensions: 18.1 x 17.2 x 4.7 inches
- Item Weight: 2.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15757261, 15735056, 15756984
- Part Description: 2004 Chevrolet S10 Surround Weatherstrip
Vehicle Fitment- 2004 Chevrolet S10 | LS, ZR5 | 6 Cyl 4.3 L GAS
OEM (Genuine) 2004 Chevrolet S10 Weatherstrip Asm-Front Side Door Lower <Use 1C5K
PartNumber: 15735055
Product Specifications- Location: Passenger Side; Driver Side
- Other Names: Lower Weatherstrip
- Item Dimensions: 34.4 x 3.6 x 0.7 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15672311
- Part Description: 2004 Chevrolet S10 Weatherstrip Asm-Front Side Door Lower <Use 1C5K
Vehicle Fitment- 2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 2004 Chevrolet S10 Weatherstrip, Rear Side Door Lower
PartNumber: 93310505
Product Specifications- Notes: Crew Cab, Auxiliary, Lower
- Location: Driver Side; Passenger Side
- Other Names: Weatherstrip
- Item Dimensions: 32.9 x 2.1 x 0.9 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Chevrolet S10 Weatherstrip, Rear Side Door Lower
Vehicle Fitment- 2004 Chevrolet S10 | Base, LS, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
FAQ for Door Seal Repair
Q: What is the removal procedure for the Door Opening Weatherstrip?
A:
The procedure is to remove the door opening weatherstrip, and gently pull the weatherstrip from the pinch weld flange.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the Rear Door Window Weatherstrip?
A:
The procedure is to install the rear side door weatherstrip, locate the butt joint at the bottom center of the window opening, and set the weatherstrip around the window opening.
By Bob
GM Specialist
01/11/2022Q: What should be noticed before installing the Weatherstrip Drip Channel-Front Door?
A:
You shall apply the drip channel in an environment free of dust or dirt that could come in contact with the sticky backing and prevent proper adhesion.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Rear Door Window Weatherstrip?
A:
The procedure is to start the butt joint and pull the rear side door window weatherstrip from the window opening.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Weatherstrip-Rear Side Door (Extended Cab (Third Door))?
A:
The procedure is to remove the top and bottom push-pin retainers and the weatherstrip.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Sealing Strip-Rear Door Upper?
A:
The procedure is to pull the weatherstrip from the door frame.
By Bob
GM Specialist
01/11/2022Q: What kind of tools will be required in the replacement of the Auxiliary Weatherstrip?
A:
The tools required include J 38778 Door Trim Pad Clip Remover.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to remove the Auxiliary Weatherstrip?
A:
The proper way is to remove the door auxiliary weatherstrip from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the Weatherstrip-Rear Side Door (Extended Cab (Third Door))?
A:
The proper way is to install the weatherstrip, and the top and bottom push-pin retainers.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the Weatherstrip Drip Channel-Front Door?
A:
The procedure is to clean the area where the drip channel is to be mounted and the affected body area, dry the area thoroughly, ensure that the body area is at a temperature range of 21-41°C (80-105°F) and that the drip channel is at a temperature range of 21-41°C (80-105°F), and install the end of drip channel.
By Bob
GM Specialist
01/11/2022See more FAQs (14)