< Back ×
My Vehicle Change Vehicle
2004 Chevrolet S10
< Back to View All
Steering Arms, Links & Rods
- Department
- Brands
- Prices
Delphi® Steering Pitman Arm for 2004 Chevrolet S10
PartNumber: TA2318Product Specifications- Castle Nut Included: Yes
- Color: Grey
- Greasable: Yes
- Grease Fitting Included: Yes
- Item Grade: Standard Replacement
- Length: 5.24
- Material: Steel
- UPC: 689604277225
- Vehicle Ride Height: Standard
- Part Description: 2004 Chevrolet S10 Steering Pitman Arm
Vehicle Fitment- 2004 Chevrolet S10 | All Trims | All Engines
$40.57
Centric® Premium™ Front Steering Pitman Arm for 2004 Chevrolet S10
PartNumber: 620.66524Product Specifications- UPC: 805890809104
- Part Description: 2004 Chevrolet S10 Premium™ Front Steering Pitman Arm
Vehicle Fitment- 2004 Chevrolet S10 | All Trims | All Engines
$19.45
OEM (Genuine) 2004 Chevrolet S10 Arm Kit, Steering Linkage Idler
PartNumber: 26054932
Product Specifications- Notes: 4WD; S-Series
- Other Names: Idler Arm
- Item Dimensions: 13.3 x 7.1 x 3.3 inches
- Item Weight: 3.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 31022859, 26033093
- Part Description: 2004 Chevrolet S10 Arm Kit, Steering Linkage Idler
Vehicle Fitment- 2004 Chevrolet S10 | Baja, Base, Durango, EL, LS, Sport, SS, Tahoe, Xtreme, ZR2, ZR5 | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 2004 Chevrolet S10 Arm Kit, Pitman
PartNumber: 26054968
Product Specifications- Notes: 4WD; S-Series
- Other Names: Pitman Arm
- Item Dimensions: 10.6 x 4.3 x 2.2 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26033087
- Part Description: 2004 Chevrolet S10 Arm Kit, Pitman
Vehicle Fitment- 2004 Chevrolet S10 | Baja, Base, Durango, EL, LS, Sport, SS, Tahoe, Xtreme, ZR2, ZR5 | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
FAQ for Pitman Arm Repair
Q: What is the removal procedure for the Pitman Arm (4WD)?
A:
The procedure is to J 29107-A Pitman Arm Puller and J 6632-01 Pitman Arm Puller.
By Bob
GM Specialist
02/11/2022Q: What should be noted when removing the Pitman Arm (4WD)?
A:
You must not hammer on the pitman's arm, pitman arm shaft, or puller.
By Bob
GM Specialist
02/11/2022Q: What should be noticed before disassembling the Pitman Shaft Seals and Bearing-Off Vehicle (700 Gear)?
A:
You shall use care not to score the steering gear housing bore when prying out the seals and the washers.
By Bob
GM Specialist
02/11/2022Q: What should be noted when assembling the Pitman Shaft Seals and Bearing-Off Vehicle (700 Gear)?
A:
You must not install the lock washer and nut until the complete installation of the pitman's arm and its components have been installed and do not adjust the pitman shaft until all components have been installed on the steering gear housing.
By Bob
GM Specialist
02/11/2022