< Back ×
My Vehicle Change Vehicle
2004 Chevrolet S10
< Back to View All
Transfer Cases
- Department
- Location
- Brands
- Prices
OEM (Genuine) 2004 Chevrolet S10 Extension Seal
PartNumber: 12547638
Product Specifications- Notes: Models 236
- Other Names: Extension Seal, Output Shaft Seal
- Item Dimensions: 3.8 x 4.0 x 1.6 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Chevrolet S10 Extension Seal
Vehicle Fitment- 2004 Chevrolet S10 | Base, LS, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
$70.49 MSRP:$116.68You Save: $46.19 (40%)
SKF® Rear Transfer Case Output Shaft Seal for 2004 Chevrolet S10
PartNumber: 19317Product Specifications- Notes: New Process 236
- Bore: 2.697"
- Boretite: No
- Outer Diameter: 2.707"
- Shaft: 1.890"
- UPC: 085311355544
- Width: 0.433"
- Part Description: 2004 Chevrolet S10 Rear Transfer Case Output Shaft Seal
Vehicle Fitment- 2004 Chevrolet S10 | All Trims | All Engines
$19.49
National® Rear Transfer Case Output Shaft Seal for 2004 Chevrolet S10
PartNumber: 710496Product Specifications- Notes: Boot Type; w/1.400in Width; w/New Process 236C Transfer Case; 2Spd; Full Time 4WD
- Inside Diameter: 47.900 mm
- Outside Diameter: 68.600 mm
- Sealing Material: Fluoro-Elastomer
- Thickness: 11.900 mm
- Part Description: 2004 Chevrolet S10 Rear Transfer Case Output Shaft Seal
Vehicle Fitment- 2004 Chevrolet S10 | All Trims | All Engines
$23.25
National® Front Transfer Case Output Shaft Seal for 2004 Chevrolet S10
PartNumber: 710668Product Specifications- Notes: w/New Process 236C Transfer Case; 2Spd; Full Time 4WD
- Type: 40
- Part Description: 2004 Chevrolet S10 Front Transfer Case Output Shaft Seal
Vehicle Fitment- 2004 Chevrolet S10 | All Trims | All Engines
$11.17
FAQ for Transfer Case Output Shaft Seal Repair
Q: What is the removal procedure for the Front Transfer Case Output Shaft Seal?
A:
The procedure is to remove the transfer case shield, the front propeller shaft, the dust seal, the output shaft retaining ring, and the front output shaft seal.
By Bob
GM Specialist
01/11/2022Q: What should be noticed while installing the Rear Transfer Case Output Shaft Seal?
A:
You must ensure the drain hole on the boot of the rear output shaft seal is facing down toward the ground.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the Front Transfer Case Output Shaft Seal?
A:
The proper way is to install the front output shaft seal, the output shaft retaining ring, the dust seal, the front propeller shaft, and the transfer case shield.
By Bob
GM Specialist
01/11/2022Q: What kind of tools will be required in the replacement of the Rear Transfer Case Output Shaft Seal?
A:
The tools required include J33843 Output Shaft Seal Installer andJ45380 Transfer Case Rear Bushing Remover and Installer.
By Bob
GM Specialist
01/11/2022