< Back ×
My Vehicle Change Vehicle
2004 Chevrolet S10
< Back to View All
Trunks & Tailgates
- Department
- Prices
OEM (Genuine) 2004 Chevrolet S10 Pick Up Box End Gate Latch Assembly(Lh)
PartNumber: 15647473
Product Specifications- Notes: W/Crew Cab, W/O Bumper
- Location: Driver Side
- Other Names: Latch, Lock
- Item Dimensions: 8.8 x 4.8 x 2.9 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Chevrolet S10 Pick Up Box End Gate Latch Assembly(Lh)
Vehicle Fitment- 2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
$17.78 MSRP:$35.82You Save: $18.04 (51%)
OEM (Genuine) 2004 Chevrolet S10 Pick Up Box End Gate Latch Assembly(Rh)
PartNumber: 15647474
Product Specifications- Notes: W/Crew Cab, W/O Bumper
- Location: Passenger Side
- Other Names: Latch, Lock
- Item Dimensions: 8.5 x 4.6 x 3.0 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Chevrolet S10 Pick Up Box End Gate Latch Assembly(Rh)
Vehicle Fitment- 2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
$17.78 MSRP:$35.82You Save: $18.04 (51%)
OEM (Genuine) 2004 Chevrolet S10 End Gate Window Latch Assembly <Use 1C6L
PartNumber: 16635395
Product Specifications- Notes: S-Series
- Other Names: Latch, Window Lock
- Item Dimensions: 5.5 x 7.5 x 2.1 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 16631756, 16635396, 16634041
- Part Description: 2004 Chevrolet S10 End Gate Window Latch Assembly <Use 1C6L
Vehicle Fitment- 2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 2004 Chevrolet S10 Pick Up Box End Gate Latch (W/Cable)
PartNumber: 15912466
Product Specifications- Notes: W/Crew Cab, W/Bumper
- Location: Driver Side
- Other Names: Latch
- Item Dimensions: 4.3 x 4.3 x 15.5 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15726085
- Part Description: 2004 Chevrolet S10 Pick Up Box End Gate Latch (W/Cable)
Vehicle Fitment- 2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 2004 Chevrolet S10 Pick Up Box End Gate Latch (W/Cable)
PartNumber: 15912467Product Specifications- Notes: W/Crew Cab, W/Bumper
- Location: Passenger Side
- Other Names: Latch
- Item Dimensions: 4.4 x 4.3 x 15.2 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15726086
- Part Description: 2004 Chevrolet S10 Pick Up Box End Gate Latch (W/Cable)
Vehicle Fitment- 2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
FAQ for Trunk Lid Latch Repair
Q: What is the installation procedure for the Bellcrank-Lift Gate?
A:
The procedure is to install the bellcrank, engage the handle and the latch rods to the bellcrank, and install the liftgate trim panel.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Bellcrank-Lift Gate?
A:
The procedure is to remove the liftgate trim panel, release the handle and the latch rods, and remove the bell crank from the liftgate.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Rear Lift Window Panel Latch?
A:
The procedure is to remove the endgate or the liftgate trim panel and the endgate cover and adjust the latch assembly location.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Latch Support-Lift Gate Window?
A:
The procedure is to remove the liftgate window latch, disconnect the electrical connectors as needed, and remove the liftgate window latch support.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Lift Gate Window Latch?
A:
The procedure is to remove the liftgate trim panel, disconnect the electrical connectors as needed, and remove the liftgate window latch.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the Lift Gate Latch?
A:
The proper way is to install the liftgate latch, connect the electrical connectors as needed, and install the bell crank.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the Lift Gate Window Latch?
A:
The proper way is to install the liftgate window latch, connect the electrical connectors as needed, and install the liftgate trim panel.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the Latch Support-Lift Gate Window?
A:
The procedure is to install the liftgate window latch support, connect the electrical connectors as needed, and install the liftgate window latch.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the Rear Lift Window Panel Latch?
A:
The proper way is to install the latch assembly nut or nuts, the endgate cover, and the endgate or the liftgate trim panel.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the Bellcrank-End Gate?
A:
The proper way is to install the bellcrank, the endgate latch rods, the endgate latch handle rod, and the endgate trim panel.
By Bob
GM Specialist
01/11/2022See more FAQs (7)