< Back ×
2004 Chevrolet S10 Universal Joints
My Vehicle Change Vehicle
2004 Chevrolet S10
< Back to View All
Driveline, Axles & 4WD
- Department
- Greasable
- Location
- Brands
- Prices
Product Specifications- Notes: Brute Force Greaseable
- Inside Lock-Up 1: 2.557"
- Outer Diameter: 1.125"
- UPC: 085311099189
- Part Description: 2004 Chevrolet S10 Center Greaseable U Joint
Vehicle Fitment- 2004 Chevrolet S10 | All Trims | All Engines
Product Specifications- Notes: Grease Fitting in Cross; 3 Joint Driveshaft; Perf Grade; Inside Lock Rings;Grease Fitting in Cross; 2 Joint Driveshaft; Perf Grade; Inside Lock Rings
- Bearing Cap Diameter: 1.125"
- Lock Ring Type: Internal
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286531055
- Part Description: 2004 Chevrolet S10 Grade Performance™ Rear U-Joint
Vehicle Fitment- 2004 Chevrolet S10 | All Trims | All Engines
Product Specifications- Notes: Brute Force Non Greaseable
- Inside Lock-Up 1: 2.557"
- Outer Diameter: 1.125"
- UPC: 085311099172
- Part Description: 2004 Chevrolet S10 Center Non Greaseable U Joint
Vehicle Fitment- 2004 Chevrolet S10 | All Trims | All Engines
Product Specifications- Notes: Incl 4 Outside & 2 Inside Lock Rings; Std Grade; Grease Fitting in Cross; 3 Joint Driveshaft;Incl 4 Outside & 2 Inside Lock Rings; Std Grade; Grease Fitting in Cross; 2 Joint Driveshaft
- Bearing Cap Axis 1 Diameter: 27
- Bearing Cap Axis 2 Diameter: 1.06
- Bearing Cap Type: Grooved
- Greasable: Yes
- Height (Inch): 1.30
- Length (Inch): 3.50
- Length Axis 1: 2.21
- Length Axis 2: 2.21
- Lock Ring Location: External, Internal
- Lube Fitting Location: Grease Fitting in Cross
- Material: Steel
- Mounting Hardware Included: Yes
- UPC: 083286003507
- Weight (Gross Pounds): 1.0
- Width (Inch): 3.50
- Part Description: 2004 Chevrolet S10 Grade Standard U-Joint
Vehicle Fitment- 2004 Chevrolet S10 | All Trims | All Engines
Product Specifications- Inside Lock-Up 1: 2.557"
- Outer Diameter: 1.125"
- UPC: 085311100441
- Part Description: 2004 Chevrolet S10 Center U Joint
Vehicle Fitment- 2004 Chevrolet S10 | All Trims | All Engines
Product Specifications- Notes: Clamp Kit (Frt. Shaft; Frt.)
- UPC: 085311554626
- Width: 0.995"
- Part Description: 2004 Chevrolet S10 Front U Joint
Vehicle Fitment- 2004 Chevrolet S10 | All Trims | All Engines
Product Specifications- Notes: Std Grade; Grease Fitting in Cross; 2 Joint Driveshaft; Incl. 4 Inside Lock Rings;Std Grade; Grease Fitting in Cross; 3 Joint Driveshaft; Incl. 4 Inside Lock Rings
- Bearing Cap Axis 1 Diameter: 1.13
- Bearing Cap Axis 2 Diameter: 1.13
- Bearing Cap Type: Grooved
- Dimension: 1.125" Cap Diameter
- Greasable: Yes
- Height (Inch): 1.30
- Length (Inch): 3.50
- Length Axis 1: 2.37
- Length Axis 2: 2.37
- Lock Ring Location: Internal
- Lube Fitting Location: Grease Fitting in Cross
- Material: Steel With Black Oxide Coating
- Mounting Hardware Included: Yes
- UPC: 083286031050
- Weight (Gross Pounds): 1.30
- Width (Inch): 3.50
- Part Description: 2004 Chevrolet S10 Grade Standard U-Joint
Vehicle Fitment- 2004 Chevrolet S10 | All Trims | All Engines
FAQ for Universal Joints Repair
Q: What kind of tools will be required in the replacement of the Universal Joint-Nylon Injected Ring?
A:
The tools required include J9522-3 U Joint Bearing Separator and J9522-5 U Joint Bearing Spacer Remover.
By Bob
GM Specialist
02/11/2022Q: What should be noticed before removing the Universal Joint-Nylon Injected Ring?
A:
You must never clamp propeller shaft tubing in a vise, always clamp on one of the yokes and support the shaft horizontally, and avoid damaging the slip yoke sealing surface.
By Bob
GM Specialist
02/11/2022Q: What kind of tools will be required in the replacement of the Universal Joint-External Snap Ring?
A:
The tools required include J9522-3 U-Joint Bearing Separator and J 9522-5 U-Joint Bearing Spacer Remover.
By Bob
GM Specialist
02/11/2022Q: What should be noticed before disassembling the Universal Joint-External Snap Ring?
A:
You must never clamp propeller shaft tubing in a vise, shall always clamp on one of the yokes and support the shaft horizontally, and shall avoid damaging the slip yoke sealing surface.
By Bob
GM Specialist
02/11/2022