Notes: 4.3 L Gas, With High Capacity; Part included with air cleaner assembly.; 4.8, 5.3 & 6.0 L Gas, With High Capacity; Part included with air cleaner assembly.; 4.3 L Gas, With High Capacity; All Models; Without Diesel; With High Capacity Cleaner; 4.8, 5.3 & 6.0 L Gas, With High Capacity
Notes: 4.3 L Gas, Without High Capacity; Part included with air cleaner assembly.; 4.8, 5.3 & 6.0 L Gas, Without High Capacity; Part included with air cleaner assembly.; 4.3 L Gas, Without High Capacity; All Models; Without Diesel; Without High Capacity Cleaner; 4.8, 5.3 & 6.0 L Gas, Without High Capacity
Other Names: Air Filter, Element
Item Dimensions: 12.8 x 10.4 x 2.6 inches
Item Weight: 1.60 Pounds
Replaced by: 22845992
Part Description: 2004 Chevrolet Silverado 1500 Element, Air Cleaner
More Info
Vehicle Fitment
2004 Chevrolet Silverado 1500 | Base, Hybrid, LS, LT, LTZ, SS, WT, XFE, Z71 Off-Road | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
Part Description: 2004 Chevrolet Silverado 1500 Panel Air Filter
More Info
Vehicle Fitment
2004 Chevrolet Silverado 1500 | All Trims | 6 Cyl 4.3L
2004 Chevrolet Silverado 1500 | All Trims | 8 Cyl 4.8L
2004 Chevrolet Silverado 1500 | All Trims | 8 Cyl 5.3L
2004 Chevrolet Silverado 1500 | All Trims | 8 Cyl 6.0L
Show More
FAQ for Air Filter Repair
Q: What should be done if an aftermarket reusable air filter is used?
A:
Technicians should inspect the MAF sensor element and the air induction hose for contamination of oil before making warranty repairs.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to install the air cleaner element?
A:
The proper way is to install the air cleaner cover and the outlet resonator, and then tighten the air cleaner outlet duct clamp at the MAF/IAT sensor.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the air cleaner element?
A:
The procedure is to remove the outlet resonator, the air cleaner cover, and the air cleaner element.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the procedure for throttle body cleaning?
A:
The procedure is to remove the air cleaner outlet duct, inspect the Throttle Body bore and throttle plate for deposits, clean the throttle body bore and the throttle plate, clean the throttle body using parts cleaning brush, and then install the air cleaner outlet duct.
Q: What is the proper way to install the manifold absolute pressure sensor?
A:
The proper way is to install a NEW MAP Sensor seal, the MAP sensor, and then connect the MAP sensor electrical connector.
Q: What is the proper way to install the upper intake manifold?
A:
The proper way is to install the EVAP canister purge solenoid valve studs, the MAP sensor, the throttle body, the PCV valve cover, a new O-ring seal, the Intake Manifold, the accelerator cable bracket, the PCV valve hose, and the fuel pipes/hoses.