Notes: Silverado, Sierra; 2WD; 1/2 Ton; Extended Cab; 143" Wheelbase; Auto Trans; W/O 4 Wheel Steering; W/O B2e Option;Silverado, Sierra; 2WD; 1/2 Ton; Extended Cab; 157" Wheelbase; Auto Trans
Other Names: Center Bearing
Item Dimensions: 9.0 x 8.3 x 4.7 inches
Item Weight: 3.70 Pounds
Fitment Type: Direct Replacement
Replaces: 07839146, 15898102, 7839146, 12471505
Part Description: 2004 Chevrolet Silverado 1500 Center Bearing
More Info
Vehicle Fitment
2004 Chevrolet Silverado 1500 | Base, Hybrid, LS, LT, SS, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Part Description: 2004 Chevrolet Silverado 1500 Bearing Kit, Propeller Shaft Center Support
More Info
Vehicle Fitment
2004 Chevrolet Silverado 1500 | Base, Hybrid, LS, LT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Part Description: 2004 Chevrolet Silverado 1500 Driveshaft Center Support Bearing
Vehicle Fitment
2004 Chevrolet Silverado 1500 | All Trims | All Engines
FAQ for Driveshaft Center Support Bearing Repair
Q: What is the proper way to install the propeller shaft center support bearing?
A:
The proper way is to install the center bearing and the propeller shaft.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the Propeller Shaft Center Support Bearing?
A:
The procedure is to remove the propeller shaft and the center bearing.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the rear axle shaft and/or gasket?
A:
The procedure is to remove the flange bolts, the Axle Shaft, and the gasket, and then clean the axle shaft flange and the outside face of the hub assembly.
Q: What is the proper way to install the front drive axle lubricant?
A:
The proper way is to install the drain plug, the fill plug, and the front Differential carrier shield, and then lower the vehicle.
Q: What is the proper way to install the front drive axle inner shaft seal and inner shaft bearing?
A:
The proper way is to install the right side bearing, the new Axle Shaft Seal, and the inner axle shaft, and then fill the differential carrier assembly.