< Back ×
2004 GMC Yukon Camber and Alignment Kit
My Vehicle Change Vehicle
2004 GMC Yukon
< Back to View All
Alignment Kits
- Department
- Prices
Product Specifications- Notes: 2WD; 4WD
- Location: Driver Side; Passenger Side
- Other Names: Adjust Cam
- Item Dimensions: 6.1 x 5.8 x 3.3 inches
- Item Weight: 2.60 Pounds
- Part Description: 2004 GMC Yukon Cam Kit, Front Upper Control Arm Adjust
Vehicle Fitment- 2004 GMC Yukon | Denali, Denali Hybrid, Hybrid, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS
FAQ for Camber and Alignment Kit Repair
Q: What is the recommended torque when tightening the jam nut on the tie rod?
A:
You can tighten the tie rod jam to 65 Nm (48 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: What should you set when performing adjustments to vehicles requiring a 4-wheel alignment?
A:
You should set the rear wheel alignment angles first to obtain proper front alignment angles.
By Bob
GM Specialist
01/11/2022Q: What is necessary after the replacement of the hand-wheel position sensor, rear-wheel position sensor, or rear-wheel steering control module?
A:
It is necessary to perform the learn wheel alignment procedure.
By Bob
GM Specialist
01/11/2022Q: What should you add when making adjustments?
A:
You should add the average frame angle to the caster reading when making adjustments.
By Bob
GM Specialist
01/11/2022Q: What should you check before checking the wheel alignment?
A:
You should check the trim heights when diagnosing suspension concerns and before checking the wheel alignment.
By Bob
GM Specialist
01/11/2022