< Back ×
My Vehicle Change Vehicle
2004 GMC Yukon
< Back to View All
Brake Dust Shields, Backing Plates & Brake Hardware
- Department
- Brands
- Prices
OEM (Genuine) 2004 GMC Yukon Cable, Parking Brake Intermediate
PartNumber: 10391699
Product Specifications- Notes: Tahoe, Yukon
- Other Names: Intermediate Cable
- Item Dimensions: 11.6 x 10.8 x 3.7 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 GMC Yukon Cable, Parking Brake Intermediate
Vehicle Fitment- 2004 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Wagner® Parking Brake Cable for 2004 GMC Yukon
PartNumber: BC141930Product Specifications- UPC: 008536571087
- Part Description: 2004 GMC Yukon Parking Brake Cable
Vehicle Fitment- 2004 GMC Yukon | All Trims | All Engines
OEM (Genuine) 2004 GMC Yukon Cable, Parking Brake Rear
PartNumber: 15087072Product Specifications- Notes: Tahoe, Yukon; Right
- Other Names: Rear Cable
- Item Dimensions: 104.4 x 1.3 x 1.1 inches
- Item Weight: 2.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15766912
- Part Description: 2004 GMC Yukon Cable, Parking Brake Rear
Vehicle Fitment- 2004 GMC Yukon | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
OEM (Genuine) 2004 GMC Yukon Rear Cable
PartNumber: 15087071Product Specifications- Notes: Tahoe, Yukon; Left
- Other Names: Rear Cable
- Item Dimensions: 13.9 x 14.0 x 3.4 inches
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 GMC Yukon Rear Cable
Vehicle Fitment- 2004 GMC Yukon | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
FAQ for Parking Brake Cable Repair
Q: What is the recommended torque when installing the rear park brake cable bracket bolt?
A:
You can tighten the rear park brake cable bracket bolt to 61 Nm (45 ft. lbs.).
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the park brake cable equalizer?
A:
The procedure is to release the parking brake, raise the vehicle, remove the nut from the threaded end of the intermediate cable and disconnect the equalizer from the rear park brake cables.
By Bob
GM Specialist
02/11/2022Q: What is the first step for replacing the front park brake cable?
A:
The first step is to release the park brake.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque when bolting the cable to the differential (clips)?
A:
You can tighten the bolt to 25 Nm (18 ft. lbs.).
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque when installing the park brake cable guide bolt to the frame for cutaway vehicles?
A:
You can tighten the bolt to 18 Nm (13 ft. lbs.).
By Bob
GM Specialist
02/11/2022Q: How do you remove the rear cables from the mounting bracket?
A:
You can remove the rear cables from the mounting bracket by depressing the retaining tabs and pulling them rearward.
By Bob
GM Specialist
02/11/2022Q: What should you remove before disconnecting the equalizer from the rear park brake cables?
A:
You should remove the nut from the threaded end of the intermediate cable.
By Bob
GM Specialist
02/11/2022Q: What should you do after installing the cable to the rear axle holding clip?
A:
You should verify that the clip is securely retaining the cable.
By Bob
GM Specialist
02/11/2022Q: What is the first step for replacing the park brake cable guide?
A:
The first step is to release the parking brake.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque when installing the nut to the threaded end of the intermediate cable?
A:
You can tighten the nut to 3.5 Nm (31-inch lbs.).
By Bob
GM Specialist
02/11/2022See more FAQs (11)