FAQ for Seat Cushion Pad Repair
Q: What is the recommended torque when installing the bolts on the roller assembly?
A:
You can tighten the bolts to 53 N.m (39 lb-ft).
By BobGM Specialist
02/11/2022 Q: What is the recommended torque when installing the center screw retaining the latch cover?
A:
You can tighten the screw to 2 N.m (18 lb in).
By BobGM Specialist
02/11/2022 Q: What is the next step after removing the rear seat from the vehicle?
A:
The next step is to remove the J-Clips from the back of the seat.
By BobGM Specialist
02/11/2022 Q: What is the first step for replacing the rear seat cushion cover and pad (60/40 Split-50/50 Split)?
A:
The first step is to remove the rear passenger seat from the vehicle.
By BobGM Specialist
02/11/2022 Q: How do you replace the rear seat cushion heater?
A:
You can remove the seat cushion trim cover, peel the seat cushion heater off of the pad and disconnect the seat cushion heater wiring harness.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque when installing the front nuts onto the studs on the underside of the cushion?
A:
You can tighten the nuts to 21 N.m (15 lb-ft).
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the front seat cushion filter?
A:
The procedure is to remove the seat cushion and remove the filter from the module.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the rear seat cushion filter?
A:
The procedure is to position the seat cushion in the up-forward position, release the seat cushion trim cover J channel along the lower edge of the trim cover and remove the filter from the blower.
By BobGM Specialist
01/11/2022 Q: What is the first step for replacing the rear seat cushion ventilation heat and cool blower?
A:
The first step is to position the seat cushion in the forward position.
By BobGM Specialist
01/11/2022 Q: How do you install the front seat cushion filter?
A:
You can install the filter from the module and install the seat cushion.
By BobGM Specialist
01/11/2022 See more FAQs (21)