< Back ×
My Vehicle Change Vehicle
2004 GMC Yukon
< Back to View All
Control Arms & Suspension Rods
- Department
- Brands
- Prices
Dorman® OE Solutions Front Driver Side Steering Knuckle for 2004 GMC Yukon
PartNumber: 697-907Product Specifications- Finish: Black
- Hub Included: No
- Installation Hardware Included: No
- Item Grade: Standard Replacement
- Material: Cast Iron
- OE Part Number: 18048228, 19257048
- UPC: 019495122487
- Part Description: 2004 GMC Yukon OE Solutions Front Driver Side Steering Knuckle
Vehicle Fitment- 2004 GMC Yukon | All Trims | All Engines
$138.34
Dorman® OE Solutions Front Passenger Side Steering Knuckle for 2004 GMC Yukon
PartNumber: 697-906Product Specifications- Finish: Black
- Hub Included: No
- Installation Hardware Included: No
- Item Grade: Standard Replacement
- Material: Cast Iron
- OE Part Number: 18048229
- UPC: 019495122470
- Part Description: 2004 GMC Yukon OE Solutions Front Passenger Side Steering Knuckle
Vehicle Fitment- 2004 GMC Yukon | All Trims | All Engines
$137.49
OEM (Genuine) 2004 GMC Yukon Knuckle Steering
PartNumber: 19257047
Product Specifications- Notes: 2WD; 4WD
- Location: Passenger Side
- Other Names: Knuckle
- Item Dimensions: 16.4 x 16.6 x 6.9 inches
- Item Weight: 17.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 18060556, 18048229
- Part Description: 2004 GMC Yukon Knuckle Steering
Vehicle Fitment- 2004 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
OEM (Genuine) 2004 GMC Yukon Steering Knuckle
PartNumber: 19257048
Product Specifications- Notes: 2WD; 4WD
- Location: Driver Side
- Other Names: Knuckle
- Item Dimensions: 13.9 x 13.8 x 5.5 inches
- Item Weight: 18.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 18060555, 18048228
- Part Description: 2004 GMC Yukon Steering Knuckle
Vehicle Fitment- 2004 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
FAQ for Steering Knuckle Repair
Q: What tool can you use to remove the retaining nut and separate the upper ball joint from the steering knuckle?
A:
You can use J 43631 and J 45851.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque when installing the brake hose and the bracket retaining bolt to the steering knuckle?
A:
You can tighten the bolt to 9 Nm (80-inch lbs.).
By Bob
GM Specialist
02/11/2022Q: What tool can be used to disconnect the outer tie rod from the steering knuckle?
A:
You can use the J24319-B.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque when installing the brake hose bracket retaining bolt to the knuckle?
A:
You can tighten the bolt to 9 Nm (80-inch lbs.).
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque when installing the park brake cable retaining bolt to the steering knuckle?
A:
You can tighten the bolt to 65 Nm (48 ft. lbs.).
By Bob
GM Specialist
02/11/2022Q: What tool can you use to remove the upper control arm retaining nut and separate the upper ball joint from the steering knuckle?
A:
You can use J 43631 and J 45851.
By Bob
GM Specialist
02/11/2022See more FAQs (1)