2005 Buick Century A/C Clutch

You need to place the clutch coil assembly on the front head, place the J 33024 over the internal opening of the clutch coil housing, align the installer with the compressor front head, install the J 8433-3 into the J 8433, center the screw in the countersunk center hole of the J 33024 and the 4-inch through bolts and washers into the J 33025, attach them to the compressor mounting bosses, turn the center forcing screw of the J 8433 to press the clutch coil onto the front head, make sure the clutch coil and the J 33024 stay in-line with each other while pressing the clutch coil onto the compressor, install the compressor clutch rotor and bearing assembly, install the compressor clutch plate and hub assembly and remove the compressor from the J 41790-A.

You need to install the compressor onto the J 41790-A and the J 33023-A onto the front head of the compressor, remove the compressor clutch plate and hub assembly and the compressor rotor and bearing assembly, and mark the clutch coil terminal location on the compressor front head and install the J 33025 onto the J 8433 and the J 8433 onto the compressor clutch coil and tighten the puller leg bolts, and tighten the center forcing screw J 8433-3 of the compressor pulley puller J 8433 against the puller pilot to remove the compressor clutch coil from the compressor.