< Back ×
My Vehicle Change Vehicle
2005 Buick Century
< Back to View All
A/C & Heating
- Department
- Brands
- Prices
OEM (Genuine) 2005 Buick Century Evaporator
PartNumber: 52494507
Product Specifications- Notes: All Models
- Other Names: Evaporator, Evaporator Core
- Item Dimensions: 8.3 x 16.5 x 13.7 inches
- Item Weight: 8.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 52469295, 52481159
- Part Description: 2005 Buick Century Evaporator
Vehicle Fitment- 2005 Buick Century | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
$191.79 MSRP:$361.88You Save: $170.09 (48%)
Four Seasons® A C Evaporator Core for 2005 Buick Century
PartNumber: 54567Product Specifications- Notes: w/o ATC; Evaporator replacement for this application may require considerable time, specialty tools, and training.
- Core Depth Fraction: 2-15/16; 2-7/8
- Core Depth MM: 73.025; 74.612
- Core Height Fraction: 11; 11-1/8
- Core Height MM: 279.400; 282.575
- Core Width Fraction: 10; 9-7/8
- Core Width MM: 250.000; 250.825; 254.000
- Depth: 2.875; 2.9375
- Height: 11.000; 11.125
- Inlet Fitting Type: Block Fitting
- Material: Aluminum
- O-Ring A Number/Desc: [24608] / Green O-Ring
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24612] / Green O-Ring
- O-Ring B Quantity: 1
- Outlet Fitting Type: Block Fitting
- UPC: 096361545670
- Width: 10.000; 9.875
- Part Description: 2005 Buick Century A C Evaporator Core
Vehicle Fitment- 2005 Buick Century | All Trims | 6 Cyl 3.1L
$81.84
Four Seasons® A C Evaporator Core for 2005 Buick Century
PartNumber: 54890Product Specifications- Notes: w/ ATC; Evaporator replacement for this application may require considerable time, specialty tools, and training.
- Core Depth Fraction: 2-7/8; 3
- Core Depth MM: 73.025; 76.200
- Core Height Fraction: 11; 11-1/8
- Core Height MM: 279.400; 282.575
- Core Width Fraction: 9-7/8
- Core Width MM: 250.000; 250.825
- Depth: 2.875; 3.000
- Height: 11.000; 11.125
- Inlet Fitting Outside Diameter: No. 8
- Inlet Fitting Type: Block Fitting
- Material: Aluminum
- O-Ring A Number/Desc: [24402] / Slimline Washer
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24403] / Slimline Washer
- O-Ring B Quantity: 1
- Outlet Fitting Type: Block Fitting
- UPC: 096361548909
- Width: 9.875
- Part Description: 2005 Buick Century A C Evaporator Core
Vehicle Fitment- 2005 Buick Century | All Trims | 6 Cyl 3.1L
$64.58
OEM (Genuine) 2005 Buick Century Case, Air Distributor
PartNumber: 52482268
Product Specifications- Other Names: Air Distributor, Case, Evaporator Case
- Item Dimensions: 16.3 x 11.4 x 9.3 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Buick Century Case, Air Distributor
Vehicle Fitment- 2005 Buick Century | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
FAQ for A/C Evaporator Core Repair
Q: What is the recommended torque for the recirculation housing screws?
A:
The recommended torque is 1.5 Nm (13 lb in).
By Bob
GM Specialist
28/10/2022Q: How do you install the Evaporator Core?
A:
If replacing the evaporator, you need to add refrigerant oil to the evaporator. You can install the water core filter to the evaporator, a new side seal to the evaporator core, a new upper seal to the evaporator core, two new lower seals to the evaporator core, the HVAC module assembly seal to the lower module case, and the evaporator core into the HVAC module assembly lower case, align the guide and attach the upper and lower HVAC module assembly case, and then install the HVAC module assembly upper screws, the defroster actuator, the recirculation housing to the HVAC module assembly, the recirculation housing screws and the HVAC module assembly.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the HVAC module assembly upper screws?
A:
The recommended torque is 1.5 Nm (13 lb in).
By Bob
GM Specialist
28/10/2022Q: How do you remove the Evaporator Core?
A:
You need to remove the HVAC module assembly, all of the outer HVAC module assembly seals, and the recirculation housing from the HVAC module assembly, release the retaining clip to the defroster actuator from the HVAC module assembly, remove the defroster actuator and the HVAC module assembly case upper screws, separate the HVAC module assembly case and remove the HVAC module assembly seal from the lower module case, the evaporator core and the water core filter from the evaporator.
By Bob
GM Specialist
28/10/2022