< Back ×
My Vehicle Change Vehicle
2005 Buick Century
< Back to View All
Alternators, Batteries & Starters
- Department
- Pulley Belt Type
- Voltage
- Brands
- Prices
Remy® Remanufactured Alternator for 2005 Buick Century
PartNumber: 21843Product Specifications- Notes: w/Remy Alt; 105 Amps
- Amp Rating: 105
- Fan Type: Internal
- New or Remanufactured: Remanufactured
- OE Manufacturer: Delco/Delphi
- One Wire Capable: NO
- Pulley Belt Type: Serpentine
- Pulley Groove Quantity: 6
- Pulley Included: Yes
- Pulley Outside Diameter: 57
- Regulator Type: Internal
- Rotation Direction: Clockwise
- UPC: 090244218439
- Voltage [V]: 1
- Part Description: 2005 Buick Century Remanufactured Alternator
Vehicle Fitment- 2005 Buick Century | All Trims | 6 Cyl 3.1L
$73.32
Quality-Built® Alternator Remanufactured for 2005 Buick Century
PartNumber: 13989Product Specifications- Amps: 105 Amps
- Clock: 1:30
- Fan: Internal
- Manufacturer: Bosch
- Pulley: 6 Groove Serpentine
- Regulator: Internal
- Rotation: Clockwise
- Volts: 12 Volts
- Part Description: 2005 Buick Century Alternator Remanufactured
Vehicle Fitment- 2005 Buick Century | All Trims | 6 Cyl 3.1L
$91.97
Remy® Remanufactured Alternator for 2005 Buick Century
PartNumber: 12567Product Specifications- Notes: w/Bosch Alt; 105 Amps
- Amp Rating: 105
- Fan Type: Internal
- New or Remanufactured: Remanufactured
- OE Manufacturer: Bosch
- One Wire Capable: NO
- Pulley Belt Type: Serpentine
- Pulley Groove Quantity: 6
- Pulley Included: Yes
- Pulley Outside Diameter: 56
- Regulator Type: Internal
- Rotation Direction: Clockwise
- UPC: 090244125676
- Voltage [V]: 1
- Part Description: 2005 Buick Century Remanufactured Alternator
Vehicle Fitment- 2005 Buick Century | All Trims | 6 Cyl 3.1L
$105.63
Remy® Alternator for 2005 Buick Century
PartNumber: 91613Product Specifications- Notes: w/Remy Alt; 105 Amps
- Amp Rating: 105
- Fan Type: Internal
- New or Remanufactured: New
- OE Manufacturer: Delco/Delphi
- One Wire Capable: NO
- Pulley Belt Type: Serpentine
- Pulley Groove Quantity: 6
- Pulley Included: Yes
- Pulley Outside Diameter: 57
- Regulator Type: Internal
- Rotation Direction: Clockwise
- Voltage [V]: 12
- Part Description: 2005 Buick Century Alternator
Vehicle Fitment- 2005 Buick Century | All Trims | 6 Cyl 3.1L
$129.35
OEM (Genuine) 2005 Buick Century GENERATOR Assembly
PartNumber: 22708250
Product Specifications- Notes: 105 Amp, 2ND Design
- Other Names: Alternator
- Item Dimensions: 9.7 x 8.2 x 8.5 inches
- Item Weight: 12.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Buick Century GENERATOR Assembly
Vehicle Fitment- 2005 Buick Century | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
FAQ for Alternator Repair
Q: What is the recommended torque for the generator rear brace nut?
A:
The recommended torque is 25 Nm (18 lb-ft).
By Bob
GM Specialist
28/10/2022Q: How do you remove the Generator Bracket?
A:
You need to disconnect the negative battery cable from the battery and remove the generator, the generator bracket bolts, and the generator bracket.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the generator bracket bolts?
A:
The recommended torque is 50 Nm (37 lb-ft).
By Bob
GM Specialist
28/10/2022Q: How do you install the Generator?
A:
You need to position the generator to the engine, install the positive battery lead to the generator, the generator output BAT terminal nut and protective boot to the generator output BAT terminal, connect the electrical connector to the generator, install the generator bolts to the generator and the generator pivot bolt to the generator, tighten the generator bolts in the order described, install the generator rear brace nut, the coolant recovery reservoir and the drive belt and connect the negative battery cable.
By Bob
GM Specialist
28/10/2022Q: How do you remove the Generator?
A:
You need to disconnect the negative battery cable, remove the drive belt from the generator, place the coolant recovery reservoir aside for access, remove the generator rear brace nut and the bolts from the generator, disconnect the electrical connector from the generator and remove the protective boot from the generator output BAT terminal, the generator output BAT terminal nut and remove the positive battery lead from the generator and the generator.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the generator output BAT terminal nut?
A:
The recommended torque is 20 Nm (15 lb-ft).
By Bob
GM Specialist
28/10/2022Q: How do you install the Generator Bracket?
A:
You need to install the generator bracket to the engine, install and finger-tighten the generator bracket bolts, install the generator and connect the negative battery cable to the battery.
By Bob
GM Specialist
28/10/2022See more FAQs (2)