< Back ×
My Vehicle Change Vehicle
2005 Buick Century
< Back to View All
Exhaust Manifolds, Pipes & Mufflers
- Department
- Brands
- Prices
OEM (Genuine) 2005 Buick Century Converter & Pipe
PartNumber: 10343185
Product Specifications- Notes: California;Federal
- Other Names: Catalytic Converter, Converter & Pipe
- Item Dimensions: 43.4 x 13.4 x 7.2 inches
- Item Weight: 17.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10301642, 25325228
- Part Description: 2005 Buick Century Converter & Pipe
Vehicle Fitment- 2005 Buick Century | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
OEM (Genuine) 2005 Buick Century Cross Over Pipe
PartNumber: 24507946
Product Specifications- Item Dimensions: 17.5 x 7.0 x 4.9 inches
- Item Weight: 4.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 24503680
- Part Description: 2005 Buick Century Cross Over Pipe
Vehicle Fitment- 2005 Buick Century | Custom, Limited, Special, Special Edition | 6 Cyl 3.1 L GAS
OEM (Genuine) 2005 Buick Century Muffler & Pipe
PartNumber: 15144846
Product Specifications- Other Names: Muffler, Muffler & Pipe
- Fitment Type: Direct Replacement
- Replaces: 10312665, 10350782
- Part Description: 2005 Buick Century Muffler & Pipe
Vehicle Fitment- 2005 Buick Century | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
Dorman® Steel Natural Exhaust Crossover Pipe for 2005 Buick Century
PartNumber: 679-002Product Specifications- Catalytic Converter Included: No
- Finish: Natural
- Flange Quantity: 2
- Flanged: Yes
- Gasket or Seal Included: Yes
- Height: 3.5"
- Inlet Inside Diameter: 2"
- Inlet Outside Diameter: 2.25"
- Material: Steel
- OE Part Number: 24507946
- Outlet Inside Diameter: 2"
- Outlet Outside Diameter: 2.25"
- Overall Length: 21"
- Package Quantity: 1
- Packaging Type: Box
- Strap Hanger Included: No
- UPC: 019495295143
- Welding Required: No
- Width: 6"
- Part Description: 2005 Buick Century Steel Natural Exhaust Crossover Pipe
Vehicle Fitment- 2005 Buick Century | All Trims | 6 Cyl 3.1L
FAQ for Exhaust Pipe Repair
Q: How do you remove the Exhaust Hanger?
A:
You need to support the exhaust system and remove the exhaust pipe hanger from the exhaust pipe and the exhaust hanger bracket, the exhaust pipe hanger from the exhaust pipe and the exhaust hanger bracket and the exhaust pipe rear hangers from the muffler, and the rear exhaust hanger brackets.
By Bob
GM Specialist
29/10/2022Q: How do you remove the Exhaust Hanger Mounting Bracket?
A:
You need to support the exhaust system, remove the exhaust pipe rear hanger insulators from the exhaust muffler rear hanger bracket, loosen the outboard rear bumper impact bar bolt and remove the inboard rear bumper impact bar bolt and the exhaust muffler rear hanger bracket.
By Bob
GM Specialist
29/10/2022Q: How do you remove the Exhaust Crossover Pipe (3.1L)?
A:
You need to remove the air cleaner intake duct, the thermostat bypass pipe, the exhaust crossover heat shield bolts, the exhaust crossover heat shield, the exhaust crossover pipe nuts, and the exhaust crossover pipe.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the exhaust crossover heat shield bolts?
A:
The recommended torque is 10 Nm (89-inch lbs.).
By Bob
GM Specialist
29/10/2022Q: How do you install the Exhaust Hanger Mounting Bracket?
A:
You need to install the exhaust muffler rear hanger bracket, the inboard and the outboard rear bumper impact bar bolts, and the exhaust pipe rear hanger insulators to the exhaust muffler rear hanger bracket, remove the support from the exhaust system and inspect the exhaust system for underbody contact.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the exhaust crossover pipe nuts?
A:
The recommended torque is 25 Nm (18 ft. lbs.).
By Bob
GM Specialist
29/10/2022Q: How do you install the Exhaust Hanger?
A:
You need to install the exhaust pipe rear hangers to the muffler and the rear exhaust hanger brackets, the exhaust pipe hanger to the exhaust pipe and the exhaust hanger bracket and the exhaust pipe hanger to the exhaust pipe and the exhaust hanger bracket, remove the support from the exhaust system and inspect the exhaust system for underbody contact.
By Bob
GM Specialist
29/10/2022Q: How do you install the Exhaust Crossover Pipe (3.1L)?
A:
You need to install the exhaust crossover pipe, the exhaust crossover pipe nuts, the exhaust crossover heat shield, the exhaust crossover heat shield bolts, the thermostat bypass pipe, and the air cleaner intake duct.
By Bob
GM Specialist
29/10/2022See more FAQs (3)