< Back ×
My Vehicle Change Vehicle
2005 Buick Century
< Back to View All
Control Arms & Suspension Rods
- Department
- Brands
- Prices
OEM (Genuine) 2005 Buick Century Knuckle
PartNumber: 23127629
Product Specifications- Notes: All Models; Left
- Location: Driver Side
- Other Names: Knuckle
- Item Dimensions: 5.8 x 13.4 x 12.4 inches
- Item Weight: 5.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 18060652, 88955418, 18060638, 10434254, 18060680, 25816684, 22990752, 20899802
- Part Description: 2005 Buick Century Knuckle
Vehicle Fitment- 2005 Buick Century | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
$260.57 MSRP:$431.28You Save: $170.71 (40%)
Dorman® OE Solutions Front Passenger Side Steering Knuckle for 2005 Buick Century
PartNumber: 697-910Product Specifications- Notes: Cast Iron
- Finish: Black
- Hub Included: No
- Installation Hardware Included: No
- Item Grade: Standard Replacement
- Material: Cast Iron
- OE Part Number: 18061055, 88955419
- UPC: 019495231943
- Part Description: 2005 Buick Century OE Solutions Front Passenger Side Steering Knuckle
Vehicle Fitment- 2005 Buick Century | All Trims | All Engines
$212.38
OEM (Genuine) 2005 Buick Century Knuckle
PartNumber: 23130695
Product Specifications- Notes: All; Buick; All; Right
- Location: Passenger Side
- Other Names: Knuckle
- Item Dimensions: 14.2 x 10.9 x 5.1 inches
- Item Weight: 4.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 18022047, 19151397, 18060617, 25816704
- Part Description: 2005 Buick Century Knuckle
Vehicle Fitment- 2005 Buick Century | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
$391.23 MSRP:$623.98You Save: $232.75 (38%)
Dorman® OE Solutions Front Driver Side Steering Knuckle for 2005 Buick Century
PartNumber: 697-911Product Specifications- Notes: Cast Iron
- Finish: Black
- Hub Included: No
- Installation Hardware Included: No
- Item Grade: Standard Replacement
- Material: Cast Iron
- OE Part Number: 18061054, 88955418
- UPC: 019495231950
- Part Description: 2005 Buick Century OE Solutions Front Driver Side Steering Knuckle
Vehicle Fitment- 2005 Buick Century | All Trims | All Engines
$212.38
OEM (Genuine) 2005 Buick Century Knuckle
PartNumber: 23130696
Product Specifications- Notes: All; Buick; All; Left
- Location: Driver Side
- Other Names: Knuckle
- Item Dimensions: 13.5 x 11.0 x 5.4 inches
- Item Weight: 4.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 18022046, 19151396, 25816705, 18060616
- Part Description: 2005 Buick Century Knuckle
Vehicle Fitment- 2005 Buick Century | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
$390.40 MSRP:$622.67You Save: $232.27 (38%)
OEM (Genuine) 2005 Buick Century Knuckle
PartNumber: 22990753
Product Specifications- Notes: All Models; Right
- Location: Passenger Side
- Item Dimensions: 5.6 x 13.1 x 12.6 inches
- Item Weight: 5.10 Pounds
- Replaced by: 23127630
- Part Description: 2005 Buick Century Knuckle
Vehicle Fitment- 2005 Buick Century | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
$264.45 MSRP:$421.79You Save: $157.34 (38%)
FAQ for Steering Knuckle Repair
Q: What is the recommended torque for the strut to knuckle bolts and nuts?
A:
The recommended torque is 120 Nm (89 ft. lbs.).
By Bob
GM Specialist
02/11/2022Q: How do you install the Steering Knuckle?
A:
You need to install the knuckle to the vehicle, the bolts and nuts attaching the strut to the knuckle and the outer tie rod to the steering knuckle, connect the front lower control arm ball stud to the knuckle, install the front wheel drive shaft bearing and inspect the front wheel alignment and adjust if necessary.
By Bob
GM Specialist
02/11/2022Q: How do you remove the Knuckle?
A:
You need to remove the tire and wheel assembly, scribe the strut to the knuckle, and remove the bearing/hub assembly, the rear wheel spindle rods from the knuckle, the trailing arm from the knuckle, the rear strut to knuckle bolts, and the nuts and the knuckle from the vehicle.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the knuckle bolts?
A:
The recommended torque is 120 Nm (89 ft. lbs.).
By Bob
GM Specialist
02/11/2022Q: How do you remove the Steering Knuckle?
A:
You need to remove the bearing/hub assembly, the front lower control arm ball stud, and the outer tie rod end from the steering knuckle, scribe the strut to the knuckle, and remove the bolts and nuts attaching the strut to the knuckle and the knuckle from the vehicle.
By Bob
GM Specialist
02/11/2022Q: How do you install the Knuckle?
A:
You need to install the knuckle to the vehicle, hand start the strut to knuckle bolts and nuts, connect the rear suspension trailing arm to the knuckle and the rear wheel spindle rods to the knuckle, install the bearing/hub assembly, tighten the strut to knuckle bolts and nuts, install the tire and wheel assembly and inspect the rear wheel alignment, adjust if necessary.
By Bob
GM Specialist
02/11/2022See more FAQs (1)