< Back ×
My Vehicle Change Vehicle
2005 Buick Century
< Back to View All
Car Bulbs
- Department
- Prices
OEM (Genuine) 2005 Buick Century Run Lamp Bulb
PartNumber: 13503401
Product Specifications- Location: Driver Side; Passenger Side
- Item Dimensions: 4.2 x 3.1 x 2.3 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25088519, 09427587, 09442445, 9417561, 09421330, 09441595, 09417561, 9442445, 25088518, 9441595, 9421330, 96057076, 9441873, 9427587, 09441873
- Part Description: 2005 Buick Century Run Lamp Bulb
Vehicle Fitment- 2005 Buick Century | Custom, Estate Wagon, Limited, Special, Special Edition, T-Type | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL
$2.41 MSRP:$4.35You Save: $1.94 (45%)
OEM (Genuine) 2005 Buick Century Run Lamp Bulb
PartNumber: 15828918
Product Specifications- Location: Driver Side; Passenger Side
- Item Dimensions: 3.3 x 2.1 x 2.1 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 1999368, 12450182, 9442486, 09442486, 01999368, 12450053
- Part Description: 2005 Buick Century Run Lamp Bulb
Vehicle Fitment- 2005 Buick Century | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
$4.93 MSRP:$8.91You Save: $3.98 (45%)
OEM (Genuine) 2005 Buick Century Run Lamp Bulb
PartNumber: 9425542
Product Specifications- Item Dimensions: 4.5 x 3.1 x 2.5 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Buick Century Run Lamp Bulb
Vehicle Fitment- 2005 Buick Century | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
$3.42 MSRP:$6.18You Save: $2.76 (45%)
OEM (Genuine) 2005 Buick Century Corner Lamp Bulb
PartNumber: 9417866
Product Specifications- Item Dimensions: 4.4 x 3.2 x 2.5 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Buick Century Corner Lamp Bulb
Vehicle Fitment- 2005 Buick Century | Custom, Estate Wagon, Limited, Special, Special Edition, T-Type | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL
$3.42 MSRP:$6.18You Save: $2.76 (45%)
OEM (Genuine) 2005 Buick Century Stoplamp Bulb
PartNumber: 9441839
Product Specifications- Item Dimensions: 4.2 x 3.1 x 2.3 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 15883346
- Part Description: 2005 Buick Century Stoplamp Bulb
Vehicle Fitment- 2005 Buick Century | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
$2.65 MSRP:$4.77You Save: $2.12 (45%)
FAQ for Turn Signal Bulbs Repair
Q: How do you remove the Headlamp Assembly or Headlamp Bulb and/or Cornering, Sidemarker, Park, and Turn Signal Bulb?
A:
You need to open the hood, apply light pressure to the headlamp lens to hold the headlamp in place while removing the retainers, lift the headlamp retainers to release, then remove the retainers, remove the headlamp mounting tabs from the slots in the upper fascia support and the fender reinforcement, disconnect the electrical connector from the headlamp, remove the headlamp and the rubber access covers from behind the headlamp bulb/sockets to be replaced, rotate the headlamp bulb/socket counterclockwise to release, remove the headlamp bulb/socket from the headlamp, and disconnect the electrical connector from the headlamp bulb/socket.
By Bob
GM Specialist
01/11/2022Q: How do you install the Headlamp Assembly or Headlamp Bulb and/or Cornering, Sidemarker, Park, and Turn Signal Bulb?
A:
You need to connect the electrical connector to the headlamp bulb/socket, install the headlamp bulb/socket to the headlamp, rotate the headlamp bulb/socket clockwise until fully seated, install the rubber access covers to the headlamp, connect the electrical connector to the headlamp, position the headlamp mounting tabs to the slots in the upper fascia support and the fender reinforcement, apply light pressure to the headlamp lens to hold the headlamp in place while installing the retainers and align the headlamp retainers over the headlamp mounting tabs, and then press the retainers down until fully seated.
By Bob
GM Specialist
01/11/2022Q: How do you install the Tail Lamp Assembly and/or Backup, Sidemarker, Stop, Turn Signal Bulb?
A:
You need to install the tail lamp bulbs to the sockets and the tail lamp sockets to the tail lamp housing, rotating clockwise until fully seated, position the tail lamp assembly to the rear body panel, and apply light pressure to the lens to retain the lamp in position during installation of the plastic wingnut retainers and install the tail lamp assembly plastic wingnut retainers, the corner of the rear compartment trim panel into position, the remaining tail lamp plastic wingnut retainer and the rear compartment convenience net to the plastic wingnut retainers and then close the rear compartment.
By Bob
GM Specialist
01/11/2022Q: How do you remove the Tail Lamp Assembly and/or Backup, Sidemarker, Stop, and Turn Signal Bulb?
A:
You need to open the rear compartment, remove the rear compartment convenience net from the plastic wingnut retainers and the visible plastic wingnut retaining the tail lamp, pull back the corner of the rear compartment trim panel to access the remaining plastic wingnuts, apply light pressure to the tail lamp lens to retain the lamp in position during removal of the remaining plastic wingnut retainers, remove the remaining plastic wingnuts retaining the tail lamp and the tail lamp assembly from the rear body panel and support the tail lamp assembly, rotate the lamp sockets counterclockwise to remove them from the tail lamp housing and remove the tail lamp housing assembly and the tail lamp bulbs from the sockets.
By Bob
GM Specialist
01/11/2022