< Back ×
My Vehicle Change Vehicle
2005 Buick LeSabre
< Back to View All
Ignition, Distributors & ECM
- Department
- Brands
- Prices
OEM (Genuine) 2005 Buick LeSabre Knock Sensor
PartNumber: 12591625
Product Specifications- Notes: Bonneville, Lesabre; 3.8l
- Other Names: Knock Sensor
- Item Dimensions: 3.1 x 2.0 x 2.1 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10456215
- Part Description: 2005 Buick LeSabre Knock Sensor
Vehicle Fitment- 2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
$71.66 MSRP:$135.22You Save: $63.56 (48%)
Delphi® Ignition Knock Sensor for 2005 Buick LeSabre
PartNumber: AS10009Product Specifications- UPC: 689604103043
- Part Description: 2005 Buick LeSabre Ignition Knock Sensor
Vehicle Fitment- 2005 Buick LeSabre | All Trims | 6 Cyl 3.8L
$50.26
Walker Products® Ignition Knock Sensor for 2005 Buick LeSabre
PartNumber: 242-1020Product Specifications- Connector Gender: Female
- Connector Quantity: 1
- Connector Shape: Round
- Length: 61 mm
- Mounting Hardware Included: No
- Terminal Gender: Male
- Terminal Quantity: 1
- Terminal Type: Blade
- UPC: 724620074585
- Wiring Harness Included: No
- Part Description: 2005 Buick LeSabre Ignition Knock Sensor
Vehicle Fitment- 2005 Buick LeSabre | All Trims | 6 Cyl 3.8L
FAQ for Knock Sensor Repair
Q: How to remove the Knock Sensor (KS) 1?
A:
You should turn OFF the ignition, drain the cooling system, raise the vehicle, disconnect the electrical connector from the knock sensor and remove the knock sensor from the engine block.
By Bob
GM Specialist
01/11/2022Q: What should be noticed in installing the Knock Sensor (KS) 2?
A:
You can not apply thread sealant to sensor threads. The sensor is coated at the factory and applying an additional sealant will affect the sensor's ability to detect detonation.
By Bob
GM Specialist
01/11/2022Q: What should be noticed in removing the Knock Sensor (KS) 2?
A:
Hot engine coolant may cause severe burns. Although the cooling system has been drained, coolant remains in the engine water jacket. This coolant will drain with the removal of the knock sensor.
By Bob
GM Specialist
01/11/2022Q: How to install the Knock Sensor (KS) 1?
A:
You should install the knock sensor into the engine block, connect the electrical connector to the knock sensor, lower the vehicle and fill the cooling system.
By Bob
GM Specialist
01/11/2022