< Back ×
My Vehicle Change Vehicle
2005 Buick Park Avenue
< Back to View All
Air Suspension
- Department
- Brands
- Prices
Dorman® Air Suspension Compressor for 2005 Buick Park Avenue
PartNumber: 949-015Product Specifications- Notes: w/4 Pin Connector
- Amperage: 20A
- Maximum Pressure: 120 psi
- UPC: 885484703810
- Voltage: 12V
- Part Description: 2005 Buick Park Avenue Air Suspension Compressor
Vehicle Fitment- 2005 Buick Park Avenue | All Trims | All Engines
$341.37
Westar® Air Suspension Compressor for 2005 Buick Park Avenue
PartNumber: CD-7714Product Specifications- Notes: Compressor - Dryer
- UPC: 656591577140
- Part Description: 2005 Buick Park Avenue Air Suspension Compressor
Vehicle Fitment- 2005 Buick Park Avenue | All Trims | All Engines
OEM (Genuine) 2005 Buick Park Avenue Compressor Asm, Auto Level Control Air
PartNumber: 12494811
Product Specifications- Notes: Park Avenue
- Other Names: Compressor, Compressor Assembly
- Item Dimensions: 8.7 x 9.9 x 6.7 inches
- Item Weight: 5.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22153457
- Part Description: 2005 Buick Park Avenue Compressor Asm, Auto Level Control Air
Vehicle Fitment- 2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
FAQ for Air Suspension Compressor Repair
Q: How to install the Automatic Level Control Air Compressor Air Filter?
A:
First, you need to connect the air hose to the air compressor assembly at two places and connect the intake air filter to the air hose and the body rail. Then, please install the heat shield and the harness tie with three bolts and install the air compressor connector onto the connector anchor. Finally, you should lower the vehicle.
By Bob
GM Specialist
01/11/2022Q: How to remove the Automatic Level Control Air Compressor Air Filter?
A:
First, you need to raise the vehicle and disconnect the intake air filter from the body rail and the air hose. Then, please slide the air compressor connector off of the connector anchor and remove three bolts and the heat shield from the air compressor bracket. Finally, you should disconnect the air hose from the air compressor assembly in two places.
By Bob
GM Specialist
01/11/2022Q: How to remove the Air Compressor?
A:
First, you need to raise the vehicle, disconnect the air tube from the air dryer, remove the bolt and the harness tie with the air tube from the air compressor bracket, remove the intake air filter from the vehicle, remove the vehicle harness connector from the air compressor connector, remove the air compressor assembly from the vehicle. Then, please slide the air compressor connector off of the connector anchor, remove the heat shield from the air compressor bracket, and remove the air compressor assembly from the bracket. Finally, you should remove the air dryer from the air compressor, remove the air hose from the air compressor at two places, and remove the two screws and the two brackets from the air compressor.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the bolts securing the heat shield and the harness tie?
A:
The recommended torque is 4 N.m (35 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the bolts retaining the air compressor assembly to the bracket?
A:
The recommended torque is 3 N.m (26 lb in).
By Bob
GM Specialist
01/11/2022Q: How to disassemble the Automatic Level Control Air Compressor Head?
A:
First, you need to remove the air compressor assembly, remove the air compressor connector from the connector anchor, remove two bolts and the heat shield from the air compressor bracket, and remove the air dryer. Then, please cut the harness tie, remove the bolt and the harness tie, remove the two harness ties and the wrap from the wires, and remove two wire terminals from the air compressor connector. Finally, you should remove the air hose from the air compressor head, remove three head bolts and the air compressor head from the air compressor assembly and remove the gasket from the air compressor head or the air compressor assembly.
By Bob
GM Specialist
01/11/2022Q: How to assemble the Automatic Level Control Air Compressor Head?
A:
First, you need to install the new gasket on the air compressor assembly, install the air compressor head on the air compressor assembly, and connect the air hose to the air compressor head. Then, please install the two wire terminals in the air compressor connector, install the wrap around four wires and secure with two harness ties, and install four wires in the harness tie and install the harness tie on the air compressor head. Finally, you should install the air dryer, install the heat shield and the harness tie on the air compressor bracket, connect the air compressor connector to the connector anchor, and install the air compressor on the vehicle.
By Bob
GM Specialist
01/11/2022See more FAQs (2)