< Back ×
My Vehicle Change Vehicle
2005 Buick Park Avenue
< Back to View All
Alternators, Batteries & Starters
- Department
- Brands
- Prices
OEM (Genuine) 2005 Buick Park Avenue Panel, Front Floor Front Console Rear Trim *Neutral
PartNumber: 88986678
Product Specifications- Notes: Park Avenue
- Other Names: Positive Cable, Rear Panel
- Item Dimensions: 21.0 x 18.5 x 8.5 inches
- Item Weight: 3.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Buick Park Avenue Panel, Front Floor Front Console Rear Trim *Neutral
Vehicle Fitment- 2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
Deka® Side Terminal Battery Cable for 2005 Buick Park Avenue
PartNumber: 00307Product Specifications- Notes: Side Post 4 GA 78in. Red 1 Lead
- Cold Temperature Rating: -40C
- Color: RED
- Conductor Material: COPPER
- Gauge: 4
- Leads: 1
- Length: 78 IN
- Nominal OD: 0.360
- Polarity: UNIVERSAL
- Stranding: 70/22.5
- Temperature Rating: 80C
- Terminal Type: SIDE
- UPC: 083996003071
- Part Description: 2005 Buick Park Avenue Side Terminal Battery Cable
Vehicle Fitment- 2005 Buick Park Avenue | All Trims | 6 Cyl 3.8L
OEM (Genuine) 2005 Buick Park Avenue Cable Asm, Battery Negative
PartNumber: 88986779
Product Specifications- Other Names: Negative Cable
- Item Dimensions: 4.0 x 12.1 x 10.4 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Buick Park Avenue Cable Asm, Battery Negative
Vehicle Fitment- 2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
Deka® Side Terminal Battery Cable for 2005 Buick Park Avenue
PartNumber: 00813Product Specifications- Notes: Additional Auxiliary Lead Reqd; Side Post Black 4GA 20in. w/1 Lead
- Color: BLACK
- Conductor Material: COPPER
- Gauge: 4
- Leads: 1
- Length: 20 IN
- Lug Hole Size: 3/8 IN
- Nominal OD: 0.38
- Polarity: UNIVERSAL
- Terminal Type: SIDE
- UPC: 083996008137
- Part Description: 2005 Buick Park Avenue Side Terminal Battery Cable
Vehicle Fitment- 2005 Buick Park Avenue | All Trims | 6 Cyl 3.8L
OEM (Genuine) 2005 Buick Park Avenue Cable Asm, Battery Positive
PartNumber: 88986778
Product Specifications- Other Names: Positive Cable
- Item Dimensions: 12.8 x 6.2 x 2.2 inches
- Item Weight: 1.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Buick Park Avenue Cable Asm, Battery Positive
Vehicle Fitment- 2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
Deka® Positive Battery Cable for 2005 Buick Park Avenue
PartNumber: 08865Product Specifications- Color: BLACK
- Gauge: 4
- Length: 7.5 IN
- Nominal OD: 0.354
- Terminal Type: TOP (UNIV)
- UPC: 083996088658
- Part Description: 2005 Buick Park Avenue Positive Battery Cable
Vehicle Fitment- 2005 Buick Park Avenue | All Trims | 6 Cyl 3.8L
Deka® Side Terminal Cable With 2 Leads for 2005 Buick Park Avenue
PartNumber: 08866Product Specifications- Notes: Side Post Splice Kit w/2 Leads
- Color: BLACK
- Gauge: 4
- Length: 7.5 IN
- Nominal OD: 0.354
- Terminal Type: SIDE
- UPC: 083996088665
- Part Description: 2005 Buick Park Avenue Side Terminal Cable With 2 Leads
Vehicle Fitment- 2005 Buick Park Avenue | All Trims | 6 Cyl 3.8L
Deka® Side Terminal Quick Connect Battery Harness Repair Splice for 2005 Buick Park Avenue
PartNumber: 08868Product Specifications- Notes: Side Post Splice Kit 1 GA Black 2 Leads
- Color: BLACK
- Gauge: 1
- Length: 7.5 IN
- Nominal OD: 0.492
- Terminal Type: SIDE
- UPC: 083996088689
- Part Description: 2005 Buick Park Avenue Side Terminal Quick Connect Battery Harness Repair Splice
Vehicle Fitment- 2005 Buick Park Avenue | All Trims | 6 Cyl 3.8L
FAQ for Battery Cables Repair
Q: How to remove the Battery Positive Cable (Top Post)?
A:
First, you need to disconnect the battery negative cable from the negative battery post, lift the positive battery post protective cover, and disconnect the battery positive cable from the positive battery post. Then, please remove the battery positive cable protector cover from the underhood fuse block, disconnect the battery positive cable from the positive battery terminal on the underhood fuse block, and raise and support the vehicle. Finally, you should disconnect the battery positive cable from the starter, disconnect the electrical harness conduit wire ties from the engine frame, remove the battery positive cable from the electrical harness conduit, and remove the battery positive cable from the vehicle.
By Bob
GM Specialist
01/11/2022Q: How to disconnect the Battery Negative Cable (Top Post)?
A:
First, you need to turn OFF all the lamps and accessories and make sure the ignition switch is OFF. Then, please disconnect the negative battery cable from the negative battery post.
By Bob
GM Specialist
01/11/2022Q: How to install the Battery Negative Cable (Top Post)?
A:
First, you need to install the battery negative cable into the electrical harness conduit and connect the electrical harness conduit wire ties to the engine frame. Then, please install the bolt securing the battery negative cable to the engine block, and lower the vehicle. Finally, you should install the bolt securing the battery negative cable to the side rail, and connect the battery negative cable to the battery negative post.
By Bob
GM Specialist
01/11/2022Q: How to install the Battery Positive Cable (Top Post)?
A:
First, you need to install the battery positive cable into the electrical harness conduit, connect the electrical harness conduit wire ties to the engine frame, install the nut securing the battery positive cable to the starter and lower the vehicle. Then, please install the battery positive cable protector cover to the underhood fuse block and install the battery positive cable to the battery positive post. Finally, you should cover the positive battery post with the protective cover and connect the battery negative cable to the negative battery post.
By Bob
GM Specialist
01/11/2022Q: How to connect the Battery Negative Cable (Top Post)?
A:
First, you need to connect the negative battery cable to the negative battery post. Then, please tighten the battery cable nut.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the engine block bolt?
A:
The recommended torque is 25 N.m (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to remove the Battery Negative Cable (Top Post)?
A:
First, you need to disconnect the battery negative cable from the negative battery post and the side rail and raise and support the vehicle. Then, please disconnect the battery negative cable from the engine block, and disconnect the electrical harness conduit wire ties from the engine frame. Finally, you should remove the battery negative cable from the electrical harness conduit, and remove the negative battery cable from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the battery cable nut?
A:
The recommended torque is 6 N.m (53 lb in).
By Bob
GM Specialist
01/11/2022See more FAQs (3)