2005 Buick Park Avenue Brake Caliper

You should not place your fingers in front of the piston to catch or protect the piston while applying compressed air.

First, you need to remove the brake caliper from the mounting bracket and support the brake caliper, remove the brake pads from the brake caliper bracket, and remove the rear brake caliper bracket. Then, please remove any rust and debris from the brake caliper bracket, inspect the brake mounting and hardware, and inspect the brake caliper bracket. Finally, you should replace the brake caliper bracket if cracked or damaged.

First, you need to remove the brake caliper from the mounting bracket and support the brake caliper, remove the brake pads from the brake caliper bracket, and remove the brake caliper bracket. Then, please clean any debris or rust from the brake caliper bracket, inspect the brake mounting and hardware, and inspect the brake caliper bracket for cracks or damage. Finally, you should replace the brake caliper bracket if cracked or damaged.

First, you need to install the brake caliper bracket to the steering knuckle and lubricate the brake caliper pin bolts with a thin coat of NIGLUBE(R) grease. Then, please install the brake pad retainers to the brake caliper bracket, and install the brake pads to the brake caliper bracket. Finally, you should install the brake caliper.

You need to use a small wooden or plastic tool to remove the piston seal from the caliper bore and discard the piston seal. You should use a flat-bladed tool to reposition the park brake actuator lever return spring from the park brake actuator lever to relieve tension on the lever.